Next 470278 Assembly Instructions Manual

Next 470278 Assembly Instructions Manual

Milano media box

Advertisement

Quick Links

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Tools Needed

Helpline

If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0333 777 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is
found to be faulty. Should you need to return the unassembled product, please repack in the original packaging.

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of two persons is required to assemble this product.
• The maximum weight this media box can hold 36''-- 42'' LCD/LED

PRODUCT INFORMATION

• Made from partical board & MDF with a pvc foil finish.
• Made in China.

CARE INSTRUCTIONS

•Gloss finishes are prone to light surface scratch and it is therefore very important
that you care for this item correctly.
• For general cleaning, periodically dust with a soft clean lint-free cloth or a soft micro fibre cloth. Please note soft
cloths (including yellow dusters) contain abrasive fibres which can lightly scratch the surface, if in doubt please try
your cloth in an inconspicuous area of the furniture first to assess its suitability. A sample of a suitable cloth for
cleaning is included within the hardware pack
• Do not rub or scrub the surface when cleaning.
• Do not use furniture polish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent
scratching or damage.
• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration
or warping.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if
necessary.
470278 MILANO MEDIA BOX
470278 MILANO MEDIA BOX
470278 MILANO MEDIA BOX
470278 MILANO MEDIA BOX
ASSEMBLY INSTRUCTIONS.
Page 1 of 6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 470278 and is the answer not in the manual?

Questions and answers

Summary of Contents for Next 470278

  • Page 1 470278 MILANO MEDIA BOX 470278 MILANO MEDIA BOX 470278 MILANO MEDIA BOX 470278 MILANO MEDIA BOX ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. Tools Needed Helpline If you have any problems with this product or require...
  • Page 2 FITTINGS PARTS STEP ONE Please note: Remove the protective film after assembly of this product - this will prevent accidental scratches during assembly 1. Insert 12 x cambolts (D) into panels 1, 5 & 6 and tighten with a screwdriver. Page 2 of 6...
  • Page 3 STEP TWO 1. Attach panels 4 (x2) to panel 2 with 4 x screws (E) and tighten with an Allen key (F). STEP THREE 1. Glue(B) and insert the 4 x wooden dowels (A) into panels 5 & 6. 2. Attach panels 5 & 6 to panel 2. 3.
  • Page 4 STEP FIVE 1. Use 2 x stickers (L) to cover the camlock holes . STEP SIX 1. Attach 3 × hinges (G) to panel 3 with 6 × screws (H) by using a screwdriver until tight. 2. Glue(B) and insert the 6 x wooden dowels (A) into panels 7 (x2) .
  • Page 5 STEP EIGHY 1. Attach hinges (J) to panel 3 & 6 with 4 × screws (K) by using a screwdriver until tight. 2. Attach hinges (I) to panel 3 & 5 with 4 × screws (K) by using a screwdriver until tight. STEP NINE 1.
  • Page 6 STEP ELEVEN 1. Attach panels 7 & 8 assembly ( x2) on the corner to cover brackets( M). Next Retail Ltd, Desford Road, Enderby, Leicester, LE19 4AT Next Retail Ltd, Desford Road, Enderby, Leicester, LE19 4AT Page 6 of 6...

Table of Contents