MiiS Horus Scop DSC 300 User Manual page 49

Focus calibration
Step 1: Move Slit Module far away from Zoom lens (more than 30 degrees), then rotate
position of Zoom lens to Tele (16x) end.
Step 2: Enter to Auto-calibration mode by screen.
Step 3: Half press OK button to active auto focus function.
Check the image of correction rod on the screen is clear or not.
If the image is not clear, please half-press the OK button again.
Zoom lens
Wide
49
Tele
Slit Module
Image of correction Plate