NYMAS BR-270 Installation And Operating Instructions

Installation and Operating Instructions
270mm projection back rest rail (inc. pad)
Exposed fixings
Concealed fixings
Stainless steel
Stainless steel
Available colours: WH, DB, GY, DG
(Stainless steel only): SP, SS
Congratulations on the purchase of your product. This back rest rail has been designed to provide its
users with extra comfort when when using washrooms.

Warnings:

• Always read the installation, operating and maintenance
instructions.
• Due to manufacturing tolerances we do not recommend
pre-drilling fixing holes before physically receiving this
product.
• A thorough check must be carried out on receiving
delivery of this product and report any defects
immediately.
• Opening the packaging without due care and attention
could result in damage to the product or injury to
yourself or others.
• This product must be stored in a dry place, the right way
up and not stacked under other equipment on site.
• The wall/fixture on which the hook is installed must be
flat and capable of taking the load.
• Installation must be carried out by a qualified tradesman
using suitable fixings for the wall substrate.
• Never alter the fixing holes as this could affect the
strength and integrity of the product.
PI_BR270XX_Rev 00
Exposed fixings
Concealed fixings
• After installation a functional test must be carried out prior
to use.
• These instructions should be retained by the user of the
product for its whole life time.
• Do not use the product for any purpose other than that for
which it was designed.
• Do not use the product if damaged / not securely fixed as
this may cause injury.
• Keep plastic bag packaging away from children.
• This product should not be subjected to impact.
• To maintain the integrity and functionality of this product,
regular cleaning and inspection is necessary.
• If in doubt, carry out your own risk assessment per
installation.
BR-270
BR-270C
BR-270S
BR-270SC