JohnsonSuisse daintree KSSDA26CHCLS Installation Manual

Corner entry shower screen

Advertisement

Quick Links

daintree
CORNER ENTRY SHOWER SCREEN
INSTALLATION GUIDE
These installation guidelines relate to the following shower
screen models:
Model
Code
900 x 900
KSSDA26CHCLS
1000 x 1000
KSSDA40CHCLS

IMPORTANT PRE-INSTALLATION NOTE:

Immediately on receipt inspect the product for transit damage, missing packs/parts or manufacturing faults.
Damage reported later cannot be accepted.
Please handle the product with care avoiding knocks and shock loading to all sides and edges of glass.
Damaged glass or missing parts will not be replaced under warranty if the installation process has begun.
SAFETY GLASS CANNOT BE REWORKED, IF BROKEN IT HAS TO BE REPLACED
Please read these instructions carefully before you start installation. Special care should be taken when drilling walls
to avoid hidden pipes or electrical cables.
Securing into a stud or timber brace is highly recommended, if unable to do so, other secure means of fixing must
then be considered.
Door + Panel Dimension
min.
max.
850
875
950
975

TOOLS REQUIRED

This product is awkward to handle.
Two people may be required at times
during installation.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the daintree KSSDA26CHCLS and is the answer not in the manual?

Questions and answers

Summary of Contents for JohnsonSuisse daintree KSSDA26CHCLS

  • Page 1 daintree CORNER ENTRY SHOWER SCREEN INSTALLATION GUIDE These installation guidelines relate to the following shower screen models: Door + Panel Dimension Model Code min. max. 900 x 900 KSSDA26CHCLS 1000 x 1000 KSSDA40CHCLS IMPORTANT PRE-INSTALLATION NOTE: • Immediately on receipt inspect the product for transit damage, missing packs/parts or manufacturing faults. •...
  • Page 2 daintree CORNER ENTRY SHOWER SCREEN INSTALLATION GUIDE ASSEMBLY COMPONENTS COMPONENT LIST 1. 2 x wall jambs 9. 4 x fixed panel - short seal 2. 2 x fixed panel extrusions 10. 2 x magentic sealing strips 3. 2 x fixed panels 11.
  • Page 3 daintree CORNER ENTRY SHOWER SCREEN INSTALLATION GUIDE Measure the shower area/shower base The mea- surement to the outside edge of the wall jambs must be within the minimum and maximum dimen- sion of the panel assembly (see table): SCREEN SIZE Model min.
  • Page 4 daintree CORNER ENTRY SHOWER SCREEN INSTALLATION GUIDE Hang the sliding doors(4) into the top rails(5). Clip the bottom of the door(13) in the bottom rail(6). The rollers (14) are pressed down to allow the rollers Make sure that the top rollers are to the top and the handle location is correct.
  • Page 5 If in doubt please contact the manufacturer of the cleaner in question. Please keep these instructions for aftercare and customer service details. Bathroom Products Australia Pty Ltd PO Box 728 Botany NSW 1455 Tel: 1300 717 717 Fax: 1300 746 480 www.johnsonsuisse.com.au...

This manual is also suitable for:

Daintree kssda40chcls

Table of Contents