Feature Settings - UROVO DT50S User Manual

2.13 Feature Settings

The following setting switches are available in the system feature
settings:
Status bar pull down: the default is "on", if disabled, the status bar

function cannot be modified.
Virtual key: the default is "on", click on the virtual key at the bottom

of the screen does not take effect after disabling the corresponding
virtual switch.
Hide navigation bar: the default is "off", select "on" if you want to

hide the navigation bar at the bottom of the screen.
Input method Editor pops up automatically: the default is "on",

select "Disable this function" if you want to disable automatic pop-up
of input method during code scanning.
Pop-up input method: the default is "on", the soft keyboard cannot

be popped up after closing.
Figure 2- 31 New Scan Settings
35