Bluetooth Operations - Telefunken TF-MSM2.106 Instruction Manual

USB/SD operation
Connecting USB/SD
• Insert a USB device into the USB port or
insert a memory card into the memory card
slot. The unit will switch to USB or SD mode
automatically. The unit will start reading the
device.
• When the device and tracks on it are
detected, the display shows the currently
playing track number and track playback time.
Playback operations
• During playback press
to pause playback. Press this button again
to resume playback.
• During playback press
go to previous or next track.
General USB notes
• This unit is equipped with a USB socket
that can read and play MP3 files stored on
standard USB flash (compatible with USB
version 2.0) up to 32 GB.
Always switch off the unit or change
mode to another one before removing a USB
flash drive to prevent damage to your USB
device.
Note: Although this product is fully
compatible with USB 2.0 standard, a small
percentage of USB flash drives might not be
readable, due to those device manufacturers'
non-compliance with the full (official) USB
standards.
• FAT/FAT32 file system are supported.
According to the USB 1.1/2.0
Standard, usage of a USB device with power
current consumption exceeding 500 mA is not
recommended without supplementary power
supply.
Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective USB
drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warranty cases.
containing BIN files in root directory may cause
malfunction of unit or damage to the software.
button
/ buttons to
from any device with Bluetooth A2DP
function.
10 meters.
of a Bluetooth device (e.g. smartphone).
UNIT:
switched on in your device (e.g. smartphone,
tablet).
MODE to select the Bluetooth mode.
begins flashing, you will find the unit listed in
the Bluetooth connections list of your device
(as TF-MSM2.106).
per device. To pair another device repeat the
above steps.
Instruction manual
Warning: use of external USB drives

Bluetooth operations

Bluetooth wireless playback
• This unit can wirelessly playback audio
• The wireless range is approximately within
• Wireless audio streaming requires pairing
HOW TO PAIR YOUR DEVICE TO THIS
• Make sure the Bluetooth function is
• Switch on the unit and press
• Once the Bluetooth pairing indicator
• If asked for a passcode, enter "0000"
• The initial setup is required only once
5
6