Yamaha 210FSH SPORT 2020 Operator's Manual page 76

Equipment operation
(5) Open the cap of the anchor light socket,
fit the protrusion on the anchor light into
the slot in the socket, and then install the
light into the socket.
1
1 Cap
2 Slot
3 Protrusion
(6) Fit anchor light stopper B into the anchor
light socket.
1 Anchor light stopper B
69
To store the anchor light:
(1) Pull anchor light stopper B upward, re-
move the anchor light, and then close the
cap of the anchor light socket.
(2) Unscrew anchor light stopper A from the
center section of the anchor light pole,
and then fold the pole.
3
(3) Connect the stoppers by fitting the pro-
trusion on anchor light stopper A into the
slot in anchor light stopper B.
2
1 Anchor light stopper A
2 Anchor light stopper B
1
(4) Install the anchor light into the anchor
light holder, and then close the lockable
storage compartment.
2
1