Clatronic SMS 2759 Instruction Manual page 41

5....-05-SMS 2759 neu
1 Speed regulator
2 Two-level control switch
3 Motor casing
4 Mixing rod, removable
5 Mixing bowl
6 Beater
7 Multi-purpose blade
8 Lid for mixing bowl
9 Whisk
10 Adapter for whisk
11 Wall mounting with fixing materials
12 Lid of the chopping machine
13 Transparent beaker
14 Chopping blade with shaft
15 Attachment release button (discs, blade)
• Take out all the parts carefully out of the packing. Save the packing and the
inner packing material for the whole duration of the warranty.
• Clean the device before using it for the first time as described in „Cleaning and
Maintenance".
The mixing rod (4) can also be attached to the wall using the attachment kit sup-
plied (11).
In order to do this, measure the distance between the two recesses on the back
and drill two holes which are this distance apart. Make sure before you start that
you will not damage any electrical wires hidden in the walls!
Insert the motor housing (3) with the mixing rod (4) into the holding device.
Two-level control switch (2):
Level : At this level it is possible to use the speed control to regulate the num-
ber of revolutions per minute.
Level : This provides the maximum speed and cannot be regulated.
15.01.2003 9:55 Uhr
Overview of Components
Before Use
Wall Mounting
Function and Accessories
Seite 41
GB
41