❶
❷
❶
❷
❶
3) Adjusting the longitudinal position
1. Loosen knobs ❷ of slide shaft ❶, and adjust the lon-
gitudinal position.
2. After adjusting the position, tighten knobs ❷.
4) Adjusting the position of the bottom roller
1. Adjusting the lateral position
Loosen three screws ❶, adjust the bottom roller so
that the elastic band is put straight, and tighten three
screws ❶.
2. Adjusting the vertical position
Loosen clamp lever ❷, adjust the position so that the
elastic band is appropriately in accordance with the
length of it, and tighten clamp lever ❷.
5) Adjusting the position of the rear roller
1. Adjusting the longitudinal and vertical positions
Loosen clamp lever ❶, adjust the position so that the
elastic band is appropriately tense in accordance with
the length of it, and tighten clamp lever ❶.
– 11 –