Related Manuals for Ivation IVAWMP
Summary of Contents for Ivation IVAWMP
- Page 1 Wooden Laundry Pedestal for Washer/Dryer User Guide SKU: IVAWMP NEED HELP? info@myivation.com 1-866-849-3049...
-
Page 2: Table Of Contents
Thank you for purchasing the Ivation Wooden Laundry Pedestal for Washer/Dryer. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS WARNING! Please read all safety precautions and instructions carefully before using this product. Failure to properly follow the guidelines established here could result in serious injury. This product is not recommended for children under 3 years old. WARNING! Choking hazard – Small parts associated with this product are a choking hazard for children under 3 years old. -
Page 4: Product Overview
PACKAGE CONTENTS RECOMMENDED TOOLS: Assembly parts (x11) Screwdriver or electric screwdriver Hardware (spare parts included) User guide PARTS Sets of cam locks Wooden pegs Screws x 11 Adjustable Protective pads & screws x 30 x 42 rubber feet x 5 *Spare hardware parts are included. -
Page 5: Instructions
PREPARATIONS BEFORE ASSEMBLY It is recommended that this assembly be done with two (2) people. It is recommended that this product be assembled on a table. ASSEMBLY INSTRUCTIONS Step 1 Insert six (6) B wooden pegs into the holes on the longer sides of panel 1 and insert eight (8) A cam screws into panels 7, as shown in the image below. - Page 6 Step 2 Insert eight (8) B wooden pegs into the holes on the shorter sides of panel 1 and panels 7. Then, insert six (6) A cam screws into panels 8, as shown in the image below. Four (4) wooden pegs and three (3) A cam screws should be used for each side.
- Page 7 Step 3 Insert two (2) B wooden pegs into the holes on panel 4 and four (4) A cam screws into the holes on panel 3, as shown in the image below. Then, fasten panels 4 and 6 to panel 3 using four (4) A cam locks.
- Page 8 Step 4 Insert two (2) B wooden pegs into the holes on panel 4 and four (4) A cam screws into the holes on panel 2, as shown in the image below. Then, fasten panels 4 and 6 to panel 2 using four (4) A cam locks. INSTRUCTIONS...
- Page 9 Step 5 Insert 16 B wooden pegs and eight (8) A cam screws into the holes along the edge and in the center of panel 1, as shown in the image below. Step 6 Lift and place the assembled section of panels 2, 3, 4 and 6 over panel 1.
- Page 10 Step 7 Insert eight (8) B wooden pegs into panels 2, 3, and 4, as shown in the image below. NOTE: When inserting B wooden pegs, make sure pegs are inserted into the bigger holes in panels 2, 3, and 4. INSTRUCTIONS...
- Page 11 Step 8 Place panel 5 over B wooden pegs and connect it to the rest of the assembly. Finally, insert and fasten C screws into the holes along panel 5. INSTRUCTIONS...
- Page 12 Step 9 Attach five (5) D adjustable rubber feet to the four corners and center of panel 5, as shown in the image below. INSTRUCTIONS...
- Page 13 Step 10 Turn over the assembly so D rubber feet are now standing on the flat, level surface. Optional: Remove the protective paper from four (4) E protective pads. Then, stick E protective pads to each corner of the assembly on top of panel 1.
-
Page 14: Specifications
SPECIFICATIONS Product type: Laundry pedestal Outer dimensions: 29.92" x 33.86" x 16.54" Inner dimensions: 26.54" x 31.73" x 12.6" Weight: 65 lbs. Weight capacity: 440.9 lbs. Material: Plywood Color/finish: White Compatible types: Front load washer or dryer Power source required: No Location: Indoor use only Adult assembly required: Yes Additional tools required: Yes... -
Page 15: Warranty
(g) Consumable parts, such as batteries, fuses, and bulbs; (h) Cosmetic damage; or (i) If any Ivation Wooden Laundry Pedestal for Washer/Dryer serial number has been removed or defaced. This Warranty is valid only in the country where the consumer purchased the Product, and only applies to Products purchased and serviced in that country. -
Page 16: Get In Touch
1-866-849-3049 IVATION is a trademark of C&A IP Holdings LLC in the US, Canada, and the EU. All other products, brand names, company names, and logos are trademarks of their respective owners, used merely to identify their respective products, and are not meant to connote any sponsorship, endorsement, or approval.
Need help?
Do you have a question about the IVAWMP and is the answer not in the manual?
Questions and answers