User Manual IVASTDDSKBK Thank you for purchasing the Ivation Sit-to-Stand Desk. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited...
Please read all directions before using the product and retain this guide for reference. This product is intended for household use only. This product is covered by a limited one-year warranty. Coverage is subject to limits and exclu- sions. See warranty for details. Box Contents Sit-to-stand desk Assembly tools...
Installation 1. Place the sit-to-stand desk onto the desired surface. Turn the desk over onto its side. 2. Place one of the discs over the hole as shown in the diagram below. 3. Place a foot over the disk, lining up the holes. 4.
Page 4
Keep monitor and laptop base fully on the worksurface. Allowing any part of base or stand to hang off the edge may result in property damage and or personal injury. Raise worksurface slowly. Raising worksurface too fast may create an unstable situation resulting in property damage and or personal injury.
Need help?
Do you have a question about the IVASTDDSKBK and is the answer not in the manual?
Questions and answers