GMC Yukon 2023 Manual page 26

Returning the Third Row Seatback to the
Upright Position
1. Second Row Power Seat Fold and
Tumble Switches
2. Third Row Power Seat Fold and Raise
Switches
To return the third row seatback to the
upright position:
1. Ensure the seat belt is in the belt
stowage clip.
2. Open the liftgate to access the controls
for the seat.
3. Press and hold the switch (2) on the side
trim of the cargo area to raise the third
row seatback.
The left switch raises the left seatback,
and the right switch raises the right
seatback.
Seats and Restraints
Warning
A seat belt that is improperly routed, not
properly attached, or twisted will not
provide the protection needed in a crash.
The person wearing the belt could be
seriously injured. After raising the rear
seatback, always check to be sure that
the seat belts are properly routed and
attached, and are not twisted.
4. Reconnect the center seat belt mini-latch
to the mini-buckle. Do not let it twist.
5. Pull on the seat belt to be sure the
mini-latch is secure.
6. Repeat the steps for the other seatback,
if desired.
25