ON MY DESK 990008 Instruction Manual

Item #990008 Instruction Manual for
Flexible Rechargeable LED Desk Lamp
Thank you for your purchase of the Flexible Rechargeable LED Desk Lamp.
Please be sure to read the instructions carefully before using to fully enjoy the advantages
of this product.
A. Main Features & Technical Parameters
1. Power Supply: built-in rechargeable lithium battery or external 5V AC adapter
2. Max. power:1.5W
3. Switching mode: Sensor touch ON/OFF and dimmer function
4. Light source:10 pcs of high bright white LEDs
5. Illumination: ≥300LUX（under fully charged battery and 29cm distance from
LED light to desk top in vertical illumination）
B. Product Illustration
C. Operating Instruction
1. The desk lamp can be manipulated into many different positions by simply bending
the neck into desired position. Please do not force the lamp to bend past its
maximum stretched out position or you may damage the lamp.
2. To turn the light on you must press the "Sensor Touch" dimmer button per diagram
"B". You can use a single touch to turn the light "On" and another single touch to turn
the lamp off.
Sensor Touch Dimmer
To adjust the brightness of the LED light use a long touch on the
"Sensor Touch" dimmer button. To make the LED light less bright, simply repeat the
long touch action.
3. To charge your LED lamp's built-in lithium battery use the supplied USB power cable
to connect to a computer's USB port. Plug the opposite side into the DC Jack located
on the back rear of the lamp.
D. Caution
1. Please fully charge the Lithium Battery before using for the first time. Please charge
the lamp for 8 hours before using for the first time.
2. Please switch the Power Switch to the OFF position if you are not using the LED lamp
for an extended period of time.
3. This product uses the DC5V power supply, and if you are going to use an external
adaptor (not included) make sure to use one with proper specifications as indicated or
you will void the warranty.
4. This product has a built-in rechargeable lithium battery and therefore when
transporting and/or using this product it must be kept away from fire, and any high
temperature environments to ensure proper functionality and avoid a possible
dangerous explosion.
5. While the LED light is on, please avoid staring directly into the LED lights from
close-up to prevent any eye distress or injury.
6. Please avoid using the LED Lamp in close proximity to any items that emit a strong
electromagnetic force. This may cause the light to turn On or Off unexpectedly.
7. This product is intended for indoor use only.
8. When the lamp is almost out of power and is no longer bright, please stop using and
recharge. Do not let the lamp completely run out of power as it may damage the
battery.
E. Package Contents
1. (1) USB power cable
2. (1) Instruction manual