ON MY DESK 990010 Instruction Manual

Item #990010 Instruction Manual for
Tri-Fold LED Desk Lamp
Thank you for your purchase of the Tri-Fold LED Desk Lamp.
Please be sure to read the instructions carefully before using to fully enjoy the advantages
of this product.
A. Main Features & Technical Parameters
1. Rated operating voltage：DC5V 500mA
2. Rated power：2.5W
3. Switch mode：Touch sensor switch
4. Light source: LEDs
5. Illuminance：＞500LUX（Illuminance of LED light vertical to the
desktop)
6. Built-in power supply: Rechargeable lithium battery
B. Product Illustration
Rotation
Lampshade
Rotation 90 º
LED Light
Power Switch
C. Operating Instruction
This unique lamp allows you to adjust the height and angle of the head in
1.
many positions. Please do not force the head of the lamp when rotating.
rotate the head 270 degrees.
Place the desk lamp on a sturdy table or surface and rotate the head to your
2.
Lamp Pole
Sensor Touch Dimmer
Lamp Base
DC Jack
Indication Light
desired position (Rotate the lamp head in two parts：① Use one hand to hold and press
the lamp base while rotating the lamp pole with your other hand; ② Use one hand to
hold the lamp pole and rotate the lamp's head with your other hand).
3. To charge your LED lamp's built-in lithium battery, use the supplied USB power cable
to connect to a computer's USB port. Plug the opposite side into the DC Jack located
next to the Power Switch (see diagram). When the battery is charging it will be a red
color and when fully charged it will be a solid green color.
4. To turn the lamp ON make sure to switch the Power Switch to ON position first. Next,
touch the Sensor Touch Dimmer Switch once to turn the light on and touch it again to
turn off. To adjust the brightness of the LED light, slide your finger along the Dimmer
Switch, in ascending or descending order.
D. Cautions D. Cautions D. Cautions
1. Please fully charge the Lithium Battery before using for the first time .
2. Please switch the Power Switch to the OFF position if you are not using the LED lamp
for an extended period of time.
3. This product uses the DC5V power supply, and if you are going to use an external
adaptor (not included) make sure to use one with proper specifications as indicated or
you will void the warranty.
4. This product has a built-in rechargeable lithium battery and therefore when transporting
and/or using this product it must be kept away from fire, and any high temperature
environments to ensure proper functionality and avoid a possible dangerous explosion.
5. While the LED light is on, please avoid staring directly into the LED lights from
close-up to prevent any eye distress or injury.
6. Please avoid using the LED Lamp in close proximity to any items that emit a strong
electromagnetic force. This may cause the light to turn On or Off unexpectedly.
7. This product is intended for indoor use only.
E. Package Contents E. Package Contents E. Package Contents
1. (1) USB power cable
2. (1) Instruction manual