DURASTEEL Work Table Assembly Instructions

Work Table Assembly Instructions
1
2
Unpack and check to make sure all contents are complete.
Please follow the steps and instructions below.
1
1. Assemble undershelf and legs
Marking the position on the legs by tape for the
height of the undershelf (Recommend at least 8"
above the floor). Slide legs into the socket of
undershelf, then, fasten the Allen screws.
3
3. Fasten legs to leg sockets
Using Allen wrench and screws to fasten legs to
leg sockets. Then, turn the whole unit upside, and
it is ready to use!
3 4
5
2
2. Insert legs to leg sockets
Place carton underneath tabletop for padding to
avoid scratching. Please insert the legs into leg
sockets.
4
4. Adjust Plastic Feet
All four legs can be adjusted for surfaces that
aren't completely level. Rotate the plastic foot pad
to compensate for differences in floor surface.
1
Top Shelf (1)
Lower Shelf (1)
Legs (4)
Allen Screws (16)
Allen Wrench (1)