Summary of Contents for DURASTEEL Simple Work Table
Page 1
Wooden Table Assemble Instructions Important If you experience any issues such as missing parts or defective, please use the QR codes on the last page to contact us. "Get Support" of the order might not help you to solve the issue.
........................Page 1 Simple Work Table w/ Undershelf (Install w/ Standard Table Legs and Undershelf) ........................Page 2 Simple Work Table w/ U-Shaped Bracing (Install w/ Standard Table Legs and U-Shaped Bracing) ........................Page 3 Cart Table w/ Cart Legs...
Allen Wrench (1) *Table Legs are optional. If you would like to apply DuraSteel Galvanized Table Legs to your Wooden Top Shelf, please order them by refering to Page 8. Recommend installing with Undershelf or U-shaped Bracing to make your table sturdier.
*Table Legs and Undershelf are optional. If you would like to assemble DuraSteel Galvanized Table Legs and Undershelf with your Wooden Top Shelf, please order them by refering to Page 8. The screw holes are pre-drilled on the wooden tabletop, it is easy to fasten the screws with a screwdriver. If the holes are not wide enough, please follow the hole position to redrill 25mm deep holes with 5mm drill bit.
Allen Wrench (1) *Table Legs and U-shaped Bracing are optional. If you would like to assemble DuraSteel Galvanized Table Legs and U-shaped Bracing with your Wooden Top Shelf, please order them by refering to Page 8. The screw holes are pre-drilled on the wooden tabletop, it is easy to fasten the screws with a screwdriver. If the holes are not wide enough, please follow the hole position to redrill 25mm deep holes with 5mm drill bit.
• Simple Cart Table Install w/ Table Legs and Casters Top Shelf (1) Table Legs (4) Leg Sockets (4) Self-Tapping Screws (16) Allen Screws (8) Allen Wrench (1) Casters (4) P l e a s e f o l l o w S t e p 1 t o S t e p 2 o n P a g e 1 f i r s t . •...
Page 7
Nut (A) Nut (B) a. Caster Assembly Insert the caster into the leg, if the rubber part is too large for the socket, please loosen the top nut (A) by moving it counter clockwise. Once the stem successfully inserted into the leg, please use a wrench to tighten nut (B) by moving it clockwise until the caster is firmly secured inside the leg.
• Install w/ Hairpin Furniture Legs Top Shelf (1) Hairpin Legs (4) Self-Tapping Screws (20) Rubber Feet (4)* *Certain models don’t come with Rubber Feet *Hairpin Furniture Legs are optional. If you would like to assemble Hairpin Legs with your Wooden Top Shelf, please order them by refering to Page 8. 2.
If you plan to add an undershelf or U-shaped Bracing to your table in the future, please follow this instruction to install your Leg Sockets. Since the dimensions of DuraSteel Undershelf and U-shaped Bracing are fixed, it’s important to pre-measure the installing distance of Leg Sockets.
Tabletop Dimensions: 24” or 30” Width with 24”, 30”, 36”, 48”, 60”, 72” Length Please install your leg sockets as the following picture and dimension list. *IMPORTANT: The length of socket should be parallel to the width of tabletop. Width of Leg Socket Length of Tabletop Length of...