Sharp AQUOS LC-32LE280X Manual page 8

Initial Installation (Continued)
HChild control level
This function allows to restrict TV channels. This
function prevents children from viewing violent or
sexual scenes that are considered inappropriate.
first
Repeat steps 1 to 3Set password.
2
Pressa/bto select "Child Control Level",
then pressENTER(ENTER).
3
Pressa/band select the desired rating,
then pressENTER(ENTER).
Item is
Describe
select
Unblock.
Turn off
Select the age to block.
(Example) If 14 years old is selected,
Age xx years
programs rated for 15 years and older
will be blocked.
Edit program
Use this menu to set up individual channels.
Repeat steps 1 and 2Manipulating
first
menus.
2
Pressa/bto select "Edit Program", then
press ENTER(ENTER). If you have set a
password in "Child Lock", enter it here.
•
See page 14 for password settings.
3
Pressa/bto select the channel to edit, pressa/
b to select the item, then pressENTER(ENTER)
and pressRETURN(BACK) to exit.
Selected item
Describe
Each channel can be deleted separately.
Pressa/bto select "Select" or "No", then
Erase
pressENTER(IN) to delete the selected
channel.
You can change the name of each
channel. Up to 5 letters or numbers can
be entered. PressENTER(ENTER) to start
Labeling c. submit
labeling.
Pressa/bto select a character, press
CDto select the next character, then
pressENTER(IN) to save.
Channel positions can be classified
Channels upside down
freely.
Channels can be switched by
Channel jump
selecting "Off" or "On".
Quick start mode
By activating this function, you can shorten the TV's
warm-up time or even leave the TV in standby mode
and then start displaying pictures, etc., through a
device connected to the network. (On off).
ATTENTION
•
Setting "Quick Start Mode" to "On" will consume more
power.
Initial Installation (Continued)
Input setting
HAuto View HDMI Input (For
HDMI input mode)
Item is
select
On/Off Set whether to use WIDE MODE Auto
Select based on signal recognition
received from HDMI signal.
HDigital Audio
This function allows you to select the audio
output signal type. (Off, Bitstream, PCM)
HSelect audio output
You can select the device to use to play the sound.
Select
Earphone Sound out through headphones.
Audio output via A/V receiver or
Negative output
bar
surround control device.
ATTENTION
•
If you select "Headphones" when the cable is inserted into the
AUDIO Output, the TV speakers will be muted and all items of the
Sound menu cannot be adjusted.
•
If you select "Audio Out", the audio through the AUDIO
Output is not adjustable and is continuously output.
Some notes for headphone output
• Use headphones with stereo plugs (3.5 mm).
•
Headphones should be removed from the socket when not in use.
The volume control menu is displayed when the ear
listening is plugged into the socket
CAUTION
•
The AUDIO output terminal is also used for headphones.
Turn down the volume before using the headset. Sound that
is too loud can damage your hearing.
HColor system
You can switch to a color system that is compatible
with the image on the screen. (Auto, PAL, SECAM,
NTSC 3.58, NTSC 4.43, PAL-60)
ATTENTION
•
If the value "Auto" is selected, the color system for each
channel is set automatically. If an image is not displayed
clearly, select a different color system (eg PAL, NTSC 4.43).
•
Only "Color System" can be selected when the input provides a composite
signal.
15 16
HStandard setting LINK
Link Activities
Using the HDMI CEC (User Electronic Equipment
Control) protocol, with Active Link you can
interactively operate compatible system devices
(e.g. DVD), by connecting compatible devices with
a certified HDMI cable to the TV.
Describe
Link operation allows you to operate HDMI
connected devices and the TV using one remote
control. (On off)
Auto power on
If in the active state, one-touch play is enabled.
While in standby mode, the TV automatically turns
on and plays images from the HDMI source. (On
off)
Select speaker
Describe
You can choose to listen to TV audio only through
a LINK-compatible audio system. (Internal
Speaker, External Device)
Return audio input
If this function is set to "Auto", the TV can send the
audio data of video content played on the TV to the
connected audio device using only one ARC
compatible cable. Using this function eliminates
the need to use a separate analog or digital audio
cable. (Off, Auto)
Connect to use "Audio Returns"
You need to use an ARC compatible cable/device
and connect to the INPUT 1 (IN1) input to enable
this function.
ATTENTION
30
•
The ARC (Audio Return Input) function only works when
using the INPUT 1 (INPUT 1) input.
•
When you use an audio system that is compatible with your
TV's ARC function, you do not need to connect an optical audio
cable to the TV.
HRestore settings
If you make complex adjustments and cannot
restore the settings to their normal state, you can
reset the settings to the factory preset values.
ATTENTION
•
If you execute "Restore settings", all settings such as
"Setting image", "Setting sound" and "Initial setting" will
be restored to the values set before export. workshop.