Korg TRITON Le Manual page 3

Using the AUDITION function as you select Programs
Whenever you select a new Program, in normal play mode or when using the Select by Category function, press the [AUDITION]
key to playback a pre-programmed musical phrase. This is a great way for you to see how the sound you've selected will work in
your performance or sequencing applications! Try it!
Work with these great TRITON Le Programs and Combinations:
PROGRAM Name
A005 Bass4DaPhunk
A015 Xpanded Voice
A031 Joystick Machine
B025 Reactor Pad
C084 D'n'B Gate Kit
COMBINATION Name
A007 Real Steppers
A020 Fantasmagoria
B016 Damper Wah Clav
C007 Strumin' 2step
C050 isabellacoola
C099 StreetCatScratch
Sequence Mode: Creating songs quickly with Song Templates
1. Press the [SEQ] key Type in a "Song #" not yet in use (if you've loaded the Preload Songs, type #2) on the numeric
keypad, then press [ENTER]
2. Press [F8] ("UTILITY") and CURSOR ► to "Load Template Song" Press [F8] to confirm Use the DIAL to choose one
of Song Templates: "P00-P16". Each song selection will load programs and effects to tracks.
3. CURSOR ▼ to "Copy Pattern to Track too?" and "check" the box with the DIAL or by pressing the [INC] key. Press
[F8] to confirm: make sure that the pattern field highlighted is set to "Preset"
use the DIAL to select a Pattern in the same style as your Song Template choice Press [F6] 4 to 8 times, to copy the
pattern into the track for a number of measures, and then press [F7] to exit. Press the [START/STOP] key to audition
the copied drum pattern
!
When you press [F6] to copy the pattern, you can first select a new pattern to create a series of patterns in the track.
4. Press the [LOCATE] key to return to the beginning of the Song CURSOR ▼ to the Track edit cell on the main sequence
page, and press the [INC] key to select Track 2 (except for the Orchestral Template, Track 2 is always Bass)
[REC/WRITE] key, and then the [START/STOP] key, and record 2 to 4 measures
to stop recording.
Performance Tips
SW1: Pitch; SW2: Portamento, Try with ARP on!
SW1: Modulate pitch; Knob1: LFO depth; Knob2: LFO speed
JS-X: Modulate RingMod freq; SW2: RingMod Wet/Dry balance
Knob2: Modulate filter LFO; SW1: Pitch from 5th to unison
SW2: JS-X lock, pitch of kit; Knob2: Lo and Hi Gain of EQ
Performance Tips
JS-Y: zero output of Drum Arp; Knob2: zero output of organ timbre
ARP on: # of notes played = # of drum parts (up to 8)
Damper: Wah; JS-Y: Clav mute; SW2: JS-Y lock; Play over ARP
SW2: zero output Drum ARP; Knob3: Volume of guitar ARP
Knob2: LFO; Knob3: Doppler effect
Knob1: scratch; SW1: Portamento; JS-Y: Pitch, up a 5th
Confirm "Create New Song?" by pressing [F8] ("OK").
Press the [START/STOP] key again to stop.
CURSOR ▼ to the Pattern number and
3
TRITON Le EasyStart
When finished, press [START/STOP]
Press the