Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Liberty DigiIP 1000 Series
Summary of Contents for Liberty DigiIP 1000 Series
- Page 1 USER MANUAL DIGIIP 1000 Series Owners Manual IPEX1001 & IPEX1002 DigiIP 1000 Series AV/IP AV over IP 1Gbps 1080P Encoder and Decoder with easy setup, no processor required, and with video wall support. www.libav.com 800.530.8998...
-
Page 2: Product Overview
PRODUCT OVERVIEW The DigiIP IPEX1000 series distribute, route, and switch 1080p HDMI signals over a standard 1 Gbps network. There is no limit on sources and decoders are limited to a total of 50. No controller needed. DIGI IP 1000 series can work with managed ID, name, setup and control is done using the interactive app. - Page 3 IPEX1001 PRODUCT BREAKDOWN 1. Power LED (Green) :When the green power LED is on the IPEX1001 has power. When the LED is off no power is supplied to the unit. 2. Status LED (Green) : LED is on when an active HDMI input is plugged in. Slow blinking is when the unit has no active HDMI input.
- Page 4 IPEX1002 PRODUCT BREAKDOWN 1. Power LED (Green) :When the green power LED is on the IPEX1001 has power. When the LED is off no power is supplied to the unit. 2. Status LED (Green) : LED is on when an active source is routed to RX. Slow blinking is when the unit has no active source routed to RX.
-
Page 5: Downloading The App
DOWNLOADING THE APP visit the IPEX1001 Product Page on www.LibAV.com Search DigiIP 1000 in the app store or The App is available in Apple or Android. Make sure the tablet is on the same network as the encoders and decoders. Once you open the app, the app will do a search. -
Page 6: Device Settings
1. System Configuration button: Device settings, Video wall settings, Advanced settings, Sys- tem information. 2. Decoder list: List of all decoders in the system. 3. Preview window: Preview of decoder selected. To route video click on encoder and drag to preview window. 4. - Page 7 CREATE A VIDEO WALL 1. First select Create a video wall. 2. Select the number of displays for Row and Column 3. Select Next OWNERS MANUAL IPEX1000 SERIES...
- Page 8 4. Name the video wall and select Composite or single. Composite means video wall and source Single means each display is a single display / 5. Select the decoder and place in the correct box on the video wall layout. Check the display and make sure the number is correct.
- Page 9 Advanced section allows you to change the following: Password, CEC, RS232, OSD, 3rd party controller settings, and Reset software settings. On the password page you can change the password from the default of no password. If you add a password you will be prompted for a password before you can access advanced section.
- Page 10 In display power on/off instruction page you can select how you want the display to be turned on/off. Each section works the same way. Type in the command for on and then off. Below is an example for CEC. Select the decoder from the left and then type in the on command and then off command. Click Apply and you done.
- Page 11 On the RS232 setting page select the device (encoder / decoder) and then set the baudrate for the device.Once done click apply. On the HDCP setting page. Select encoder and then turn on or off HDCP. Once done, click apply. OWNERS MANUAL IPEX1000 SERIES...
- Page 12 Select either encoder or decoder and then click Apply. Select either encoder or decoder and then click Apply. Rev 230101 OWNERS MANUAL IPEX1000 SERIES...
- Page 13 Turn on or off the option for the OSD button to show on the bottom of the home page. Select all decoders or active decoders. Press OSD button to turn on the OSD information on the decoders. To turn off, resend the source.
- Page 14 3rd party controller gives you access to another app/browser inside this app. Turn on type in the name and put in the url. Below is screenshot of the home screen. The button opens the browser and takes you to the address you entered. Press back in the upper left hand corner (in the browser)once you are done.
- Page 15 Pressing Reset software settings will open up a pop-up window. If you press yes it will clear new search is required for devices to populate all settings on the software. A System information area has information on encoders, decoders and logs. OWNERS MANUAL IPEX1000 SERIES...
- Page 16 The Tx information screen shows information on all encoders including: IP address, device name, alias name, firmware, rs232 settings. The Rx information screen shows information on all decoders including: IP address, device name, alias name, firmware, rs232 settings. Rev 230101 OWNERS MANUAL IPEX1000 SERIES...
- Page 17 The System logs page shows whether devices are online or offline and any errors. Click copy button to save information to send to support if needed. OWNERS MANUAL IPEX1000 SERIES...
-
Page 18: Technical Specifications
TECHNICAL SPECIFICATIONS Model IPEX1001 / IPEX1002 Physical Parameter Case Material IPEX1001: Industrial-grade metal chassis with metal brackets IPEX1002: Industrial-grade metal chassis with metal brackets Dimensions IPEX1001: 175mm [W] x 100mm [D] x 25mm [H] IPEX1002: 175mm [W] x 100mm [D] x 25mm [H] Weight IPEX1001: 600g IPEX1002: 600g... - Page 19 Thank you for your purchase. For technical support please call our toll-free number at 800-530-8998 or email us at supportlibav@libav.com www.libav.com 800-530-8998 OWNERS MANUAL IPEX1000 SERIES...
Need help?
Do you have a question about the DigiIP 1000 Series and is the answer not in the manual?
Questions and answers