Sony SRS-XB100 Help Manual page 46

While the phone is ringing or a phone conversation is in progress, adjust the volume by pressing the –/+
3
(volume) buttons on the speaker or operating the smartphone or mobile phone.
When you press the –/+ (volume) buttons on the speaker or adjust the volume on the smartphone or mobile phone,
(power) indicator flashes once or 3 times.
the
To end a call, press the
4
If you were listening to music before the call, playback will resume when the call ends. If you end a call by operating
the smartphone or mobile phone, playback will also resume when the call ends if you were listening to music before
the call.
Hint
When the receiver is unable to hear or having trouble with hearing your voice, lean closer to the speaker and then talk into its
microphone.
The volume of music playback and calling is set independently in the speaker.
Note
When using the Stereo Pair function, the sound of the phone call is output only from the speaker with the blue lit (BLUETOOTH)
indicator.
Depending on the smartphone or mobile phone, playback may not pause when making a call.
Use a smartphone or mobile phone at least 50 cm (1.6 ft) away from the speaker. Noise may result if the speaker and the
smartphone or mobile phone are too close.
Related Topic
Pairing and connecting with BLUETOOTH devices
Terminating the BLUETOOTH connection (After use)
Receiving a call
(play)/ (call) button.
5-048-619-11(1) Copyright 2023 Sony Corporation
46