Advertisement
Dear Customer,
Thank you for purchasing TAKSTAR ESA-081 line array speaker cabinet. It
features compact structure, easy installation, adjustable angle, clearsound
to suit for medium or large reinforcement applications.
Please read the user manual carefully before operation and keep it for reference
in future. If you have any question or suggestion, please contact our local dealer.
Features
1. It consists of 8 inch 50mm cone MFLF and 44mm compression driver HF
2. The woofer is designed with elastic and durable cloth surround for quick
MFLF response and sufficient dynamic
3. The HF is designed with Polyimide diaphragm for bright and flat high
frequency and detailed sound
4. Special directivity wave guide horn is designed for effectively controlling the
vertical directivity, linear sound source, low attenuation of long sound
transmission
5. Symmetric magnet design, low harmonic distortion
6.The crossover is designed with low consumption OFC inductor, high quality
polypropylene & polyester capacitor for reliable but prominent sound
7.Trapezoidal enclosure and acoustic foam eliminate standing wave and
provide pure MFLF, flat frequency response. The speaker cabinet also features
compact structure, connection bar and magnetic pin, vertically -4°~ 0°~10°
adjustable in 8 steps to adjust the projection freely
Product content
Speaker cabinet
1pc
Connection bar
2pcs
Pin
6pcs
User manual
1pc
Application
Music bar, small show, multifunction hall
Specification
Rated Power: 300W(AES)
Rated Impedance: 8Ω
Frequency Response (±3dB): 75Hz-20kHz
Sensitivity（1W/1M）：96dB
Coverage: H120°×V10°
Max SPL: 117dB
Crossover Mode: two way passive
Crossover Frequency: 1600Hz
Suspension: connection bar, pin, vertically -4°- 0°- 10° adjustable in 8 steps
Connector: 2×NL4speakon（IN1+, 1-, LINK1+, 1-）
Enclosure: 15mm plywood
Finish: black painting
HF: 1.75"×1（44mm）
LF: 8"×1（50mm）
Dimension: 455×279×250mm（W×D×H）
Net Weight: approximate 15kg
Note: The above data is obtained from the test of Takstar laboratory and
Takstar has the final interpretation right!
广东省电声工程技术研究开发中心
广东省得胜电子有限公司制造
地址：广东省惠州市博罗县龙溪街道富康一路2号
ESA-081
Caution
1.To ensure safety, the maximum speaker cabinet quantity is 16 on one side.
2.Make sure the power and impedance of connected equipment matches with
that of this product before operation
3.The speaker cabinets must be installed by professional technician, and in the
place hard to touch.
4.Keep the horn to the audience area to ensure the sound effect.
5.Handle with care during moving the speaker cabinet to avoid damage.
6.Fix the connection bars and pins on the speaker cabinet after operation.
Installation methods
Figure 1（0°-10° adjustment）
1.Four flying points for suspension with -4°~ 0°~ 10°adjustable.
1)0°-10° adjustment：insert the pin into 0 hole at B, and insert into the relative
hole at A (refer to figure 1), e.g. if you need to adjust to 8 degree, insert into 0
hole at B, and 8 degree at A.
2)-2°/-4° adjustment: insert the pin into 0 hole at A, and insert into the relative
hole at B (refer to figure 2)，e.g. if you need to adjust to -2 degree, insert into 0
hole at A, and 2 degree hole at A.
2.Two line array speaker cabinets are paralleled as a group via one cable. Before
paralleled impedance, 8Ω, after paralleled impedance 4Ω.
3.This full range speaker cabinet has built-in crossover. It is recommended to
connect one group of full range speaker cabinets with one channel of pro power
amplifier EKA-3A/3D/403/403D.
Safety instruction
To avoid electric shock, over temperature, catching fire, explosion, mechanical risk
and hurt or property loss caused by improper use, please read the following items
carefully before operation:
1.Make sure the power of connected equipment matches with that of this product
before operation. Adjust the volume to proper level during operation. Do not
operate at high volume level to avoid hearing loss.
2.If abnormal phenomenon (smoke, abnormal smell) happens, please turn off the
power switch and disconnect the power plug with power socket, and send the
product to local dealer for maintenance.
3.The product and accessories should be put in dry and ventilated place rather than
humid or dusty environment. Prevent the product from liquid, rain, water,
over-colliding, throwing, vibrating, vent hole covered to avoid function destroyed.
4.When the product needs to be installed on wall or ceiling, please fix it tightly to
avoid dropping risk.
5.Please abide by safety rules during operation. Do not use the product in the place
prohibited by regulation or law to avoid accident.
6.Do not disassemble or repair the product by yourself to avoid hurt. If you have
question or need service, please contact the local dealer.
邮编：516121
全国服务热线：400 6828 333
Line array full range speaker cabinet
Figure 2（-2°/-4° adjustment）
传真：0752-6383950
邮箱：xs@takstar.com
扫一扫，了解更多产品
Advertisement
