Summary of Contents for Westover FBE Microscope with HD3 Display
Page 1
FBE Microscope with HD3 Display User Manual 18421 Bothell-Everett Hwy. Suite 110 Mill Creek, WA 98012 Phone: (800) 304-3202 or (425) 398-1298 Fax: (425) 398-0717 ZP-PKG-0367 E-mail: info@westoverscientific.com REV 1 Web: www.westoverfiber.com...
Page 2
CErtiFiCation tested Equipment All pre-qualification tests were performed internally at Westover Scientific, Inc., while all final tests were performed externally at an independent, accredited laboratory. This external testing guarantees the unerring objectivity and authoritative compliance of all test results. Westover Scientific’s Commerce and Government Entities (CAGE) code under the North Atlantic Treaty...
USER MANUAL Westover Scientific FBE Microscope with HD3 Display Contents Co n t E n t s INtRoDUctIoN ....................................4–5 Key Terms & Concepts ...................................4 Fiber Connectors ..................................4 Simplex Fiber, Dirt & Contamination, Scratches ......................5 Dirt & Contamination ................................5 Scratches ......................................5 FBE PRoBE MIcRoScoPE .................................6...
By developing and introducing the equipment and software to inspect, analyze and clean fiber connectors, Westover Scientific is able to provide a comprehensive solution for the performance and preservation of fiber optic interconnects.
USER MANUAL Westover Scientific FBE Microscope with HD3 Display Simplex Fiber, Dirt & Contamination, Scratches siMPLEX FiBEr ConnECtors Ferrule Fiber A simplex fiber connector contains a single fiber located in the center of the ferrule. Common types include SC, LC, FC and ST.
FBE Probe: Controls FBE ProBE MiCrosCoPE Westover’s FBE Probe Microscope is a portable video microscope with an integrated HD3 Display that is used to inspect fiber optic connectivity. The FBE Probe is designed to provide an economical solution for inspecting both “male” and “female” (e.g., bulkhead) ends of an optical interconnect.
The FBE Probe Microscope uses a select group of FBET inspection tips. These tips are interchangeable and allows the probe to interface with different types of fiber connectors. Below are three common types of FBET tips that are available at Westover. FBEt tiP CatEgoriEs*...
USER MANUAL Westover Scientific FBE Microscope with HD3 Display HD3 Display: Overview HD3 DisPLaY The HD3 Display combines performance and value in a small form-factor device. It is designed for ultimate portability and incorporates features that enable comfort and efficiency. It features a 1.8” TFT LCD screen and an innovative GripSwitch™...
USER MANUAL Westover Scientific FBE Microscope with HD3 Display HD3 Display: Charging and Changing Battery Charging the Battery WARNING: Use ONLY the AC adapter/charger provided to power the display and charge the battery. IMPORTANT: Charge the battery for ~4 hours before using the battery power for the fi rst time.
USER MANUAL Westover Scientific HD3 Display: Controls FBE Microscope with HD3 Display ControLs Probe Input FBE Probe hardwired Ac Power Input alternative AC power and battery charger input Low Battery Indicator when lit, remaining battery life = 30 minutes 1.8” tFt LcD Screen GripSwitch™...
USER MANUAL Westover Scientific FBE Microscope with HD3 Display HD3 Display: Power Modes, Hanging Accessory Power Modes The HD3 Display features 3 power modes for the LCD display: oN Mode GripSwitch™ Mode oFF/cHARGE Mode Continuous ON mode Battery conserving mode...
Need help?
Do you have a question about the FBE Microscope with HD3 Display and is the answer not in the manual?
Questions and answers