Sanyo VPC-E1 Instruction Manual page 158

i If Card B already has image data in it when it replaces Card A, file names
are assigned as follows.
When the highest image number on Card B (before replacing) is
lower than the highest image number on Card A: the file name of the
next recorded image continues from last file name recorded on Card A.
Card A
Card B
Previously recorded images
When the highest image number on Card B (before replacing) is
higher than the highest image number on Card A: the file name of the
next recorded image continues from last file name recorded on Card B.
Card A
Card B
Previously recorded images
HINT
What about the internal memory?
i The file number memory function is always set to "OFF" for the internal
memory; it cannot be set to "ON".
0001, 0002 ..... 0012, 0013
Replace card
0001, 0002, 0014, 0015 ...... 0025, 0026
0001, 0002 ..... 0012, 0013
Replace card
0020, 0021, 0022, 0023 ...... 0025, 0026
142
English