Table of Contents
Advertisement
3. Traveling with the Notebook PC
Turn off the Notebook PC and disconnect all lines before moving it. Following the below
steps, if you want to travel with your Notebook PC.
3-1 Attention
1.
Charge the Battery Pack and the spare Battery Pack fully.
2.
Turn off the Notebook PC and disconnect from the wall outlets.
3.
Shut down the LCD Screen completely and smoothly.
4.
Disconnect the AC lines.
5.
Disconnect all lines.
6.
Place the Notebook PC in carrying case to protect it from dirt, water, shock and scratches
before traveling.
7.
Check that you have taken the spare Battery Pack, AC Adapter, power lines, manual and
warranty card. DO NOT forget the passwords of the Notebook PC and HDD.
8.
Find out the voltage type in the countries you will visit. Your Notebook PC comes with a
universal AC-DC adapter, so you only need to buy the different power cords to connect the
different outlets or the hotel may provide universal outlets to support your power cord as
well as voltages.
If you drive your car with the Notebook PC, DO NOT leave the Notebook PC facing
the sun. Place it in the shady and cool area.
DO NOT remove the HDD immediately while or after operating. Set the Notebook PC
into the Standby mode or Hibernation mode, before moving it.
The connection between Internet and your Notebook PC will be interrupted when the
system enter the hibernation mode.
3-2 How to enter the suspend mode
Click the left button of the mouse on the "Start"→ Click the left button of the mouse on the
"Turn Off Computer"，Click the left button of the mouse on "Stand By" or
"Hibernation" items，then the system will enter the standby mode or Hibernate mode.
If you will attend a meeting with the Notebook PC and want still keep the Notebook PC in
the current state, please set the system into suspend mode. When you turn on the Notebook
PC again, the system will return the last state, which you want.
ViewSonic VNB101
6
Advertisement
Table of Contents
