Starting And Shutting Down The Projector - ViewSonic PJ588D User Manual

Starting and Shutting Down the Projector

1.
Connect the power cord to the pro-
jector (A). Connect the other end to
a wall outlet.
Turn on the power switch (B).
The Power LED and Lamp-ready
LED turn on.
2.
Remove the lens cover.
3.
Turn on the connected devices.
4.
Ensure the Lamp-ready LED is on
a steady (not flashing) orange and
then press the Power button to turn
on the projector.
The projector splash screen displays
and connected devices are detected.
If the connected device is a PC,
press the appropriate Fn hot keys
on the computer keyboard to switch
the display output to the projector.
(Check the PC user manual to deter-
mine the appropriate Fn hot keys to
change display output.)
5.
If more than one input device is
connected, press the Source button
repeatedly to switch among devices.
6.
To turn off the projector, press the
Power button. When the "Power
Off?/Press Power again" message
appears, press the Power button.
The projector turns off.
:
Warning
Power off the projector accordingly and unplug the power cord before moving the projector
ViewSonic PJ588D/PJ568D/PJ508D
Splash Splash Screen Screen
.
12