Remote Control Parts
Important:
Avoid using the projector when bright fluorescent lighting turned on. Certain high-frequency fluorescent lights can disrupt
remote control operation.
Be sure nothing obstructs the path between the remote control and the projector. If the path between remote and projector
is obstructed, you can bounce the remote signal off certain reflective surfaces such as projector screens.
ITEM
LABEL
1.
IR transmtter
2.
Status LED
3.
Laser
4.
Up
ViewSonic
Transmt sgnals to projector
Lght when the remote control s used
Press to operate the on-screen ponter
Up arrow when connected through USB to a PC
PJ588D/PJ568D/PJ508D
DESCRIPTION
SEE PAGE:
6