Cleaning And Storage - ProBreeze PB-P01 Instruction Manual

Instructions:
1.
Remove the front panel of the air purifier by holding the upper part of
the panel and lifting upwards and away from the unit.
2. Remove the composite filter by pulling the two tabs at the top of the filter.
3.
Ensure that the new filter is fitted in the same direction with the blue side and
pulling tabs facing outwards.
4.
Reattach the front panel filter.
Replacement filter model number: PB-P01F

CLEANING AND STORAGE

WARNING: ALWAYS TURN THE APPLIANCE OFF, UNPLUG THE POWER
CORD FROM THE ELECTRICAL OUTLET BEFORE HANDLING OR
CLEANING IT.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO RUN INTO THE
INTERIOR OF THE APPLIANCE, AS THIS COULD CREATE A FIRE AND/OR
ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR SOLVENTS, AS THIS
CAN DAMAGE THE APPLIANCE.
- Do not attempt to clean the appliance in any other way than that detailed by the
manufacturer
- Clean the exterior surface of the appliance by wiping it with a soft, damp cloth.
Dry the appliance with a soft, clean cloth.
- Store in a clean, dry place away from direct sunlight. Place out of reach of
children.
- Clean the vents, openings, and filter of the appliance regularly with a vacuum
cleaner, using the brush attachment to avoid any dust build-up.
- To store your product, we recommend using the original or a similar sized box.
- The filter should be cleaned every two weeks.
English | 7