Safety Instructions - Quick 870D Instruction Manual

1.Safety Instructions

CAUTION
 During the installation and use of this product, all electrical safety regulations of
the country and regions must be strictly observed.
 The power supply must be disconnected when disassembling the product. Do not
operate with power on.
 If the product does not work properly, please contact the supplier or our company,
and do not disassemble or change the product in any way. We are not responsible
for any problems caused by unauthorized maintenance or modification.
WARNING
 The product should be used away from places where there is magnetic
interference.
 Don't install the product in a place where the surface is easy to shake or be
impacted, as it may damage the product.
 When the hot plate is in use, the surrounding temperature is extremely high, so be
careful not to burn yourself.
 Don't install the product in places where it may be exposed to rain or moisture.
 Don't use in flammable and explosive environments.
 Please place the hot plate on a table covered with fire-resistant and heat-resistant
rubber mats to avoid fire.
1