Panasonic DMR-HST270 Operating Instructions Manual page 22

Screen icons
Red : Timer recording standby is
activated.
Grey: Timer recording standby is
deactivated.
[
Currently recording programme
(Red)
A part or all of the programme will not
be recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was
not completed because of some reason.
Auto Renewal Recording is set.
( 21)
Guide Link (
Series Timer Recording (
Displayed if the recording can fit in the
OK
remaining space
Daily or weekly timer programme is set.
• The timer remains set until the date
(Date)
indicated below
It may not be possible to record
because:
- there is not enough space left.
- programmes are deactivated, etc.
- the number of possible programmes
has reached its maximum. (
Split Programme (
• Programmes to be recorded with Keyword recording (
are not displayed.
22
TQBS0165
20)
20)
.
65)
20)
24)
Notes on recording
• When you programme successive timer
recordings to start, about last 1 minute of earlier
programme will not be recorded.
• Timer recording will not start while:
- copying HD Video (AVCHD) from USB device
- changing the recording mode (picture quality)
of a programme in "Picture Quality Change"
(Only when "Now" is selected)
- copying video/photos/music files
- formatting
• When the recording mode (picture quality) of a
programme recorded in DR mode is changed,
its new audio and subtitle language settings will
be determined by the following settings:
- "Audio Type for Digital Broadcast" (
- "Multi Audio", "Subtitles" of "Preferred
Language" ( 53)
- "Audio Description" (
55)
53)