Advertisement
Quick Links
?
IMPORTANT:
Please ensure that you charge the solar light in maximum sunlight for a minimum period of
3 days to ensure the internal battery is charged before switching on the light, in order that
the lights work on a full charge.
The
most
important
remember for the operation of your
SOLAR PIR SENSOR LIGHT is that
it works from the power contained
in DIRECT SUNLIGHT. The more
direct sunlight the solar panel
receives in a day, the longer the
light will operate.
SOLAR PIR SENSOR LIGHT
OPERATION INSTRUCTIONS
thing
SLSW1
to
■
Main Unit:
The main unit contains 4*0.5W LED, motion sensor
and integral batteries (Li Rechargeable battery, 3.7V
1800mAh). When deciding where to install this unit,
keep in mind that the motion sensor that actives the
light has a "field of vision" of approx. 7 meters (in front
of the light) 90º (horizontal) at 25℃ environmental
temperature when mounted at a height of 2.5m.
Challenger_SLSW1_Instructions_Rev01
Advertisement
Related Manuals for Challenger SLSW1
Summary of Contents for Challenger SLSW1
- Page 1 SOLAR PIR SENSOR LIGHT OPERATION INSTRUCTIONS SLSW1 IMPORTANT: Please ensure that you charge the solar light in maximum sunlight for a minimum period of 3 days to ensure the internal battery is charged before switching on the light, in order that the lights work on a full charge.
- Page 2 ■ Solar Panel: OFF --- The solar panel is the power source for the SOLAR Position for shipping or extended periods where PIR SENSOR LIGHT. It converts the sun’s energy into the unit is not being used. electricity that charges the battery stored in the main Position for initial 3-day charge before final unit.
- Page 3 Errors and omissions excepted. These instructions have been carefully checked prior to publication. However, no responsibility can be accepted by Challenger for any misinterpretation of these instructions. CHALLENGER SECURITY PRODUCTS 10 Sandersons Way,...