Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Challenger Manuals
  4. Outdoor Light
  5. SL150C
  6. Manual

Challenger SL150C Manual

Outdoor motion sensor light
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
OUTDOOR MOTION SENSOR LIGHT

SPECIFICATIONS

1. POWER : 220V - 240V ~ 50Hz.
2. 3 seconds to 10 minutes adjustable shut-off time.
3. 120 watts (MAX.) lighting load for halogen lights.
4. 90° elliptical view field, 12 metres forward.
5. Weather resistant.
6. LED Indication of PIR Stand-by and Activated Mode.
7. Detection range and light sensitivity adjustable.
F
UNCTION & CONTROL
1.TIME( ) : Adjusts the infrared motion sensor's shut-off time. Light will remain on for the
setting time interval after last motion is detected.
2.LUX(¤/): The light sensitivity adjustment allows you to easily set the light so that it
won't go on during daylight.
MODEL SL150C
1
Fig. 1

Advertisement

loading

Related Manuals for Challenger SL150C

Summary of Contents for Challenger SL150C

  • Page 1: Specifications

    MODEL SL150C OUTDOOR MOTION SENSOR LIGHT SPECIFICATIONS 1. POWER : 220V - 240V ~ 50Hz. 2. 3 seconds to 10 minutes adjustable shut-off time. 3. 120 watts (MAX.) lighting load for halogen lights. 4. 90° elliptical view field, 12 metres forward.

  • Page 2: Installation

    INSTALLATION Warning : If in doubt, the installation of the infrared motion sensor light should be carried out by a qualified electrician. Before you begin, please verify the contents of this package. It should contain the following parts:(see Fig. 2) LIST PARTS NAME QUANTITY...

  • Page 3: Location Selection

    1. Turn off the power at the main fuse box in your home(see Fig. 3). 2. Fix metal bracket on the wall with 2 W ood Screws (not included). 3. Fix halogen lamp to metal bracket with attached hardware. 4. Strip sheath and insulation of cable. Let conductors expose approximate 6 mm.
  • Page 4 2. Before mounting the sensor on the wall or ceiling, please refer the figures below to prevent INCORRECT installation. MOUNT ON STABLE SURFACE AIM SENSOR DOWNWARD TO REDUCE RANGE DON'T EXPOSE TO RAIN OR AVOID REFLECTED LIGHT FROM BRIGHT SURFACES ROOF RUNOFF MORE SENSITIVE TO MOVEMENT POSITION SENSOR EXACTLY LEVEL...
  • Page 5 Adjustments: Time(¾) : The detector has an adjustable “Time ON” control from 3 sec. minimum to a maximum of 10 minutes (approx). Timer starts working after the last movement is detected. While there is movement from a heat source in the detecting area the lighting will remain on and the time will keep resetting.

  • Page 6: Troubleshooting

    By flipping the connected power switch Off-On twice quickly, it will change from Auto Mode to PERMANENTLY ON Mode. Thanks to the custom designed IC for SL150C, the detector will return to “Auto Mode” i.e. light will go off automatically after two hours or by flipping power switch Off-On once instead.
  • Page 7 Due to our policy of continuous improvement we reserve the right to change specification without prior notice. Errors and omissions excepted. These instructions have been carefully checked prior to publication. However, no responsibility can be accepted by Challenger for any misinterpretation of these instructions.