Table of Contents
Advertisement
4.
Follow the app step-by-step guidance, including the pairing process when prompted:
a) Scan or enter the gateway QR code located on the bottom of the gateway or included in the pack-
aging.
1
Pairing button
b) Press and release the Bluetooth pairing button located on the front edge of the gateway.
5.
Consult the app for the remaining step-by-step guidance.
7
Maintenance
This section describes how to care for the gateway.
7.1
Storage mode
When the gateway is placed in storage mode, the gateway is Off and does not perform any communication
or monitoring/control functions.
To place the gateway into storage mode:
1.
Remove the external power to the gateway.
2.
Press and hold the pairing button for 15 seconds until the LED indicators no longer illuminate.
3.
To exit storage mode, apply external power to the gateway.
8
Troubleshooting
This section describes how to troubleshoot common errors that may be encountered.
B
A
1
C
D
EN
7
Advertisement
Table of Contents
