Advertisement
B. Keeping Machine Clean
1. Daily schedule after each day's grinding
a. Tilt machine back on handle.
b. Clean under carriage with water using garden hose and nozzle
2. Do not let any cake-up of cement grinding paste occur as this could create an overload on your
machine.
C. Replacement of Worn, Damaged or Missing Parts
1. Advantages
a. If worn parts (bearing, gears, etc ) are not replaced promptly , serious damage to your
machine could occur.
b. Your machine will operate more efficiently with new Terrco
2. Use only authorized TERRCO
authorized TERRCO
D. Morflex Flexible Coupling
1. Bolts, (Ref. No. 44, 48), should be checked weekly for tightness. Loose bolts cause extreme
vibration and premature failure of rubber inserts in the couplings.
2. Your flexible couplings (Ref. No. 46) should be changed a minimum of once a year whether you
use your machine or not.
E. Stone Wear and Replacement
1. Check your stones for wear periodically, as the stones may be worn flush with stone holder lugs
and the operator may be grinding with the steel stone spiders.
2. When changing stones it is recommended that you use 2" diameter plug stones.
®
parts as our warranty will not apply if other than factory
®
parts are used.
®
parts.
Advertisement
