Cisco LINKSYS WRT54G3G Quick Installation Manual page 4

WRT54G3G Setup for
3
Broadband WAN Only
A
Make sure that the 3G/UMTS
Router is powered off.
B
Disconnect the cable that
connects your cable or DSL
modem to your PC.
C
Plug the cable from the modem
into the Router's blue Internet
port. This is the same cable that
you just disconnected from your
computer.
D
The Router comes with a yellow
network cable. Plug one end of
the network cable into your
computer's network port. Your
computer's network port is the
same port that was previously
connected to the modem.
E
Plug the other end of the network
cable into one of the Router's
yellow ports numbered 1 to 4.
4
B
C
D
E