Advertisement
Quick Links
Owner's Manual: Vertical Wall Mount Rack Enclosure
THIS MANUAL APPLIES TO THE FOLLOWING SKUs: 00406857 00406858 00406859 00406860 00406861
00406862 00406863 00406864 00406865 00406866 00406867 00406868 00406869 00406870 00406871
00406872 00406873 00406874 00406875 00406876 00406877 00406878 00406879 00406880 00406881
Keep this information for further reference.
Thank you for purchasing a NavePoint product. In case of any questions regarding the installation or use of
product, please call us at 888.505.1363.
Please examine the product for any damaged parts. If any part is damaged or missing, contact NavePoint for
further assistance. Do not attempt to install or use product if it has been damaged.
During installation, lay product contents on cardboard or other protective surface to avoid any damage.
Improper installation or use of this product can result in damage to the product, other equipment, or personal
injury. It is recommended that installation to be performed by a qualified installer. NavePoint cannot be held
responsible for damage to equipment or personal injury resulting from improper use or installation of product.
If product is intended to store/ mount equipment, please ensure the equipment stored/ mounted does not
exceed the specified weight capacity. Install the heaviest equipment first and install it at the bottom of the rack.
Install equipment starting from the bottom of the rack and move upward.
Limitations of Liability: In no event will NavePoint be liable for any damages, whether direct or indirect,
special, punitive, incidental or consequential damages (including, but not limited to, lost profits or revenue,
loss of use, lost business opportunities or loss of goodwill) or for thecosts of procuring substitute products,
arising out of or in connection with the use of the product, whether such liability arises from any claim based
upon contract, warranty, tort (including negligence), product liability or otherwise, whether or not seller has
been advised of the possibilityof such loss or damage. In no event will seller's total cumulative liability, from
all causes of action and all theories of liability, exceed the total amounts actually paid to seller by customer
under the order that gives rise to any liability hereunder.
© 2022, NavePoint, LLC
www.NavePoint.com
customerservice@navepoint.com
MN_NP_VMRE_04/2022_R1.0
Advertisement
Summary of Contents for Infinite NavePoint 00406857
- Page 1 www.NavePoint.com customerservice@navepoint.com Owner’s Manual: Vertical Wall Mount Rack Enclosure THIS MANUAL APPLIES TO THE FOLLOWING SKUs: 00406857 00406858 00406859 00406860 00406861 00406862 00406863 00406864 00406865 00406866 00406867 00406868 00406869 00406870 00406871 00406872 00406873 00406874 00406875 00406876 00406877 00406878 00406879 00406880 00406881 Keep this information for further reference.
-
Page 2: Feature Identification
1. Feature Identification Warning: Do not attempt to mount the rack on wall, when any equipment is mounted inside enclosure. Enclosure can hold up to 150 pounds. Before installation, make sure wall surface can hold weight of enclosure / equipment. Features for all other models are similar except the 2U &... - Page 3 2. Enclosure Configuration Door Locks 2U, 3U, 4U 5U, 6U, 8U The 2U series models have one lock on the side of the unit that can be secured with the included key. The 5U series models have locks on the front door and the top panel door that can be secured with the included keys.
-
Page 4: Top View
3. Cable Access and Management Top View Top View Bottom View Bottom View 2U, 3U, 4U 5U, 6U, 8U The top and bottom panels of the enclosure both have circular cable access ports for convenient cable management. The tops of all models have three 1.75” ports and two 1” ports. The bottoms of 2U series models have two 1”... -
Page 5: Reversing The Front Door
Reversing The Front Door In order to accommodate various rack installations, the front door can be reversed by switching the configuration of the latch, lock and hinges. To reverse the door, simply remove the screws that secure the latch, lock and hinges to the enclosure. -
Page 6: Adjusting Mounting Rail Depth
Mounting Rails The enclosure comes with reversible horizontal mounting rails that have threaded holes for mounting rack equipment. The holes on one side of the rail are threaded for M6 hardware, while the holes on the other side are threaded for 12- 24 hardware. -
Page 7: Optional Patch Panel Installation
Optional Patch Panel Installation The unit comes with an integral, slide-out mounting bracket at the top of the enclosure. It can be used to secure a patch panel to the enclosure, and it partially slides out for easier cabling access. To install a patch panel on the patch panel mounting bracket, use the included mounting screws and washers to secure the equipment to the rack rail.