Advertisement
Reversing The Front Door
In order to accommodate various rack installations, the front door can be reversed by switching the configuration of the
latch, lock and hinges. To reverse the door, simply remove the screws that secure the latch, lock and hinges to the
enclosure. Move each piece to the opposite side of the enclosure, so that there are two hinges on one side (one at the
top, one at the bottom) and install the latch and the lock on the other side.
Note: The unused screw holes are filled with rubber placeholders. To remove the placeholders, push them through with
a screwdriver. Keep the placeholders to refill unused screw holes.
www.NavePoint.com
4
customerservice@navepoint.com
Advertisement
