Related Manuals for ubicquia ubigrid DTM+
Summary of Contents for ubicquia ubigrid DTM+
- Page 1 Quick Install Guide ubigrid ™ DTM + + Quick Install Guide ubigrid ™ DTM + + 2051 2051 Copyright © 2020 Ubicquia LLC. All rights reserved. Patent pending technology...
- Page 2 Rogowski Coil Bundle: Blue: Line 1 Red: Line 2 Power Wire Connectors: Blue: Line 1 Rogowski Coil Holders 2x Red: Line 2 White: Neutral *OBS: Installation guide for de-energized units 2051 Copyright © 2020 Ubicquia LLC. All rights reserved. Patent pending technology...
-
Page 3: Installing The Bracket
QR code. This is unique to each device confirming installation. Locate barcode on transformer and scan as well. The two units are now paired to one another. 2051 Copyright © 2020 Ubicquia LLC. All rights reserved. Patent pending technology... - Page 4 Tighten the two mounting screws on the bottom of the sensor unit using a #2 Phillips screwdriver. The sensor unit is now secured in place. *FULL SENSOR ASSEMBLY 2051 Copyright © 2020 Ubicquia LLC. All rights reserved. Patent pending technology...
- Page 5 Reinstall pressure release valve in the open end of the T Junction. Ensure pressure transducer and pressure release valve are installed correctly. Refer to image for proper assembly order. 2051 Copyright © 2020 Ubicquia LLC. All rights reserved. Patent pending technology...
- Page 6 Screw the nut until the components are properly tightened on the eye bolt. Repeat step 5a-5d for the remaining two power wires. 2051 Copyright © 2020 Ubicquia LLC. All rights reserved. Patent pending technology...
- Page 7 A Rogowski holder is provided to secure the connected coil in place. Open the holder so that the top and bottom extend beyond the connected Rogowski coil. 2051 Copyright © 2020 Ubicquia LLC. All rights reserved. Patent pending technology...
- Page 8 With the zip tie tightened, the Rogowski coil assembly is complete. Repeat steps 6b-6j with the remaining Rogowski coil and holder. Securing it around the matching power wire assembly. 2051 Copyright © 2020 Ubicquia LLC. All rights reserved. Patent pending technology...
- Page 9 Quick Install Guide ubigrid ™ DTM + + 7. Assembly Complete The UbiGrid DTM+ installation is complete. The transformer is ready to be installed onto a utility pole. 2051 Copyright © 2020 Ubicquia LLC. All rights reserved. Patent pending technology...