Wall Mounting - ViewSonic VG2709-2K-MHD User Manual

Wall Mounting

NOTE: Only use UL Certified wall mount kits.
Refer to the table below for the standard dimensions for wall mount kits.
Maximum Hole pattern
Loading
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm
NOTE: Wall mount kits are sold separately. To obtain a wall mounting kit,
contact ViewSonic® or your local dealer.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Remove the monitor stand.
4. Attach the mounting bracket to the VESA mounting holes at the rear of the
device. Then secure it with four (4) screws (M4 x 10 mm).
5. Follow the instructions that come with the wall mounting kit to mount the
monitor onto the wall.
Interface Pad
(W x H)
100 mm
(W x H x D)
Front
Pad Hole Screw Specification
& Quantity
M4 x 10 mm
4 pieces