Overview - Rikon Power Tools 80-800VS Operator's Manual

FIG. D
C
D
E
F
G
80-800VS 8" VARIABLE SPEED 3/4 HP BENCH GRINDER OVERVIEW
A. LED Work Light
B. Eye Shield Adjustment Knob (x2)
C. Eye Shield Assembly (x2)
D. Wheel Cover (x2)
E. 8" Grinding Wheel, 60 Grit
F. Tool Rest (x2)
G. Tool Rest Adjustment Knobs (x4)
TOOLS REQUIRED FOR ASSEMBLY:
NOTE: Full Parts Explosion and Parts List are listed on pages 16 and 17.
NOTE: The specifications, photographs, drawings and information in this manual represent
the current grinder model when the manual was prepared. Changes and improvements may
be made at any time, with no obligation on the part of Rikon Power Tools to modify previously
delivered units. Reasonable care has been taken to ensure that the information in this manual
is correct, to provide you with the guidelines for the proper safety, assembly and operation of
this machine.
Page 10

OVERVIEW

A
B
H
# 80-800VS
8" VS BENCH GRINDER
N
I
H. Variable Speed Dial
I. Water Tray
J. On/Off Switch with Removable Key
K. Mounting Holes in Base (2x)
L. 8" Wire Wheel
M. Spark Arrester (x2)
N. Motor
- #2 Phillips Screwdriver
L
K
J
M