Disposal - ABB POLIM-R Operating Instructions Manual

Surge arrester
Hide thumbs Also See for POLIM-R:
Table of Contents

Advertisement

ABB
7.

DISPOSAL

POLIM
disposed of based on the respective applicable regional regulations in an environ-
mentally-friendly manner. The materials should be given up for recycling.
Constituent components are:
Silicone rubber (not halogenated)
The silicone rubber can break down into SiO
cased metal-oxide varistors.
Metal-oxide varistors
The metal-oxide varistors are sintered ceramics consisting up to 90% of ZnO. The
following additions are also contained within:
Metal-oxide varistors are coated with a thin glass coating containing lead-oxide
(< 0.1% of the weight).
The substances are present as an oxide in metal-oxide varistors. A wash-out test
in accordance with an EPA specification (Federal Register/vol. 45, No 98 /Rules
and regulations) has shown that the sintered metal-oxide varistors can be dis-
posed of as industrial waste without infringing on EEC guidelines.
No danger to personal health or the environment is present during normal opera-
tion.
Doc. 1HC0075743 AA
®
-R surge arresters are environmentally-friendly products which must be
silicone rubber (not halogenated) for the external insulation
mounting sections and other parts made of aluminium
metal-oxide varistors
fibreglass-reinforced plastic straps
percent by weight over 1%: Bi
gerous substances according to EU ordinances
percent by weight between 0.1 and 1%: NiO and Cr
poisonous and dangerous materials pursuant to EU guideline 91/689/EEC
Operating instructions for POLIM
and CO
2
O
and Sb
O
, which are considered to be dan-
2
3
2
3
EN
©
R surge arrester
, thus uncovering the en-
2
O
, which are considered
2
3
15

Advertisement

Table of Contents
loading

Table of Contents