Advertisement
Applications:
• Cruise ships
• Multi-purpose facilities
• Auditoriums
• Schools
• Courts of law
• University campus buildings
• Performing arts centers
• Hotel meeting room complexes
• Houses of worship
• Conference centers
• Teleconferencing systems
• Civic centers
• Small theaters
DIGITAL ELECTRONICS
SPECIFICATIONS
System Controller Board:
Socket 370 SBC (single board computer),
or equivalent, or better
Processor: Intel
Celeron 600 MHz, or
®
equivalent, or better
Cache: 128 kilobytes or more
Memory: 64 megabytes or more EDO
RAM
Drives:
• 3.5" 1.44 megabyte floppy disk drive
• 32X CD-ROM
• 10 gigabyte or larger hard disk drive
Video Port:
True color, PCI video board with
four megabytes of video RAM and
selectable resolutions from 640 x 480
to 1,600 x 1,200, plus refresh rates
from 43 Hz to 200 Hz. The system is
shipped set for 800 x 600 at 75 Hz.
Network Interface Port:
10/100BaseT fast Ethernet board with
RJ-45 connector
Digital Audio Processing Boards:
Digital Audio I/O: 32 channels in / 32
channels out per DPU board
Processors: Four Motorola 56002
80 MHz DSP chips per board
Digital Audio Bussing: 256 inter-board
channels (between DPU boards),
256 inter-cell channels (between DSP
chips)
Backplane:
Eight-slot passive backplane with (3) PCI
slots and (5) ISA slots, (PIC/MG CPU
slot for easy board swapping)
SOFTWARE
SPECIFICATIONS
Operating System:
• Microsoft
Windows
2000 Professional
®
®
for system controller board
• MWare
3.x for sound
™
system design, control, and
diagnostics (operates under Microsoft
2000)
Virtual Audio Devices (In Software
Environment Libraries):
• AES digital audio input and output
ports and level controls
• Automatic mixers from 2 to 32 input
channels with direct outputs and
linking capability
• Bitmaps to incorporate a graphic into
the system control interface
• BoBs (Break-out-Boxes) analog input
and output ports and level controls,
with control ports for virtually any
system control parameter
• Blocks: a graphic object that contains
a child window with a sub-system or
sub-function, etc.
• Bump panels: a graphic object for a
control area, label, message, etc.
• Comments: a text entry area to type
in any type of note or comment for
explanation or clarification
• Control modifiers to limit the range of
controls
• Crossover networks: 2-, 3-, and 4-
way using Bessel, Butterworth, and
Linkwitz-Riley filter functions in
appropriate slope-rates from 6 dB to
48 dB per octave in 6 dB increments
• Delay lines: 5, 50, and 200 ms, plus
3D position calculating delays, from 1
to 16 outputs
• Diagnostics for the system (compiled-in)
• Diagnostics for the system (non-
compiled)
• Dip panels: a graphic object for a
control area, label, message, etc.
• Dynamics: AGCs, compressors,
duckers, expanders, GAP Ambient
Level Sensors
, noise gates, and
™
limiters
• Equalization filters: all-pass filters,
band-pass filters, CD horn lift,
graphic EQs, high-pass filters, low-
pass filters, parametric filter sets,
shelving filters, and tone controls
• Error indicators for digital errors
• Feedback Ferret
acoustic feedback
™
elimination technology
• Hardware failure indicators
• Labels: graphic areas to type in any
type of label, banner, etc.
• Level controls: attenuators with and
without trim control (limits); cross-
faders; distribution amplifiers with 2
to 16 outputs; multi-channel
attenuator groups from 2 to 16
channels; On-Off switches; panning
attenuators from 2 to 5 channels;
ramps with adjustable ramp level
change, ramp time, and ramp rate
2
• Logic controls:
Boolean with 2, 4, 8 or 16 inputs
RPN: base integer RPN, base logic
RPN, base % RPN, control inverter,
dual flip-flop, event counter, or flip-
flop functions
• Meters: LED with tiny and large
signal-presence or overload indication,
Peak and RMS meters in 4
appearances with parameter controls
• Mixers from 2 to 64 inputs and from 1
to 16 outputs
• Presets: up to 255 system-wide with
more possible
• Program launchers to launch other
programs from within MWare 3.x
• RoomLink
room combiners, using
™
either automixers, mixers, or mixers
with delay, for 3 to 15 rooms
• Routers: from 1 to 32 inputs and from
1 to 32 outputs, with or without
• Processor preconfigurations for 4
Peavey speaker systems
• Sub-presets: up to 255 for individual
child windows with more possible and
schedulable with a built-in event timer
• System mute: to mute all outputs
simultaneously
• Test functions: DC-voltage
generator, frequency-response
probe, I/O probe, pink-noise
generator, signal probe, sine-wave
generator, and a white-noise
generator
• Title blocks: a graphic area to type in
any type of title, etc.
• Via function to allow a signal to loop
back up the signal chain without
creating feedback oscillation
• Wave file players for 32, 44.1, and
48 kHz system sample rates at 100%,
50%, and 25% of that sample rate.
Notes: (1) New devices may be created
and stored by the user in these
libraries
(2) Any control parameters of any
of the above devices may be
controlled via the control ports on
the BoB or CAB I/O's, and via
third-party control software with a
properly configured interface port.
GENERAL SPECIFICATIONS
Controls:
• Front door lock
• Keyboard lock
• System power switch
• Power LED
• Power switch, Power and HDD LEDs
• Chassis slide rails
Connectors:
Front panel: (1) AT keyboard connector
Advertisement
