Helpful Cleaning Tips - Coca-Cola freestyle Flex User Manual

COCA-COLA FREESTYLE FLEX | PRODUCT REPLACEMENT
®
Replacing HFCS (high fructose corn syrup)
When to replace HFCS Replacing HFCS and cleaning connector
Understand how to determine if the
Double check
1
HFCS BIB (bag-in-box) needs to be
to see
replaced .
how much
product is
Pour screen
left by lifting
All sweetened beverage buttons will the box .
be grayed out .
Resetting HFCS
Use a cloth to
2
catch any
Once the new HFCS box is
spills, and turn
installed, press the HFCS box to
connector
reset, and the prime function
counter-
will automatically follow .
clockwise to
loosen .
Remove
3
connector
and replace
with new HFCS
sweetener BIB .
NOTE:
check product is
within the Enjoy
By Date.
20
Scrub using the
4
blunt end of the
nozzle brush
(#149326)
and soak in
approved
sanitizer solution
(Kay-5 Sanitizer®) .
Wait two minutes and repeat with
clean sanitizer then, air dry .
Open the box
5
and pull out the
fitment.
CAUTION:
DO NOT
use a
sharp object
to open.
Attach the
6
connector
to the fitment
Always
and turn
clockwise to
tighten .
© 2023 The Coca-Cola Company | Confidential information of The Coca-Cola Company | Coca-Cola Freestyle® Flex User Guide | V7 230309
COCA-COLA FREESTYLE
®

Helpful cleaning tips

Coca-Cola recommends
Kay-5 Sanitizer, or a
®
comparable food-grade
chlorine sanitizer.
If using Kay-5 Sanitizer,
2
add 1oz packet
(28.4g)
of Kay-5 Sanitizer to
21/2-gallons of
(9.5L)
fresh, warm water in
a clean bucket .
When using a chlorinated detergent other than
Kay-5 Sanitizer, follow the instructions to produce a
100 ppm chlorine sanitizer solution .
Kay-5 Sanitizer, cleaning brush and replacement nozzle
can be ordered by calling 1-800-241-COKE (2653) .
In Canada, call 1-800-318-COKE (2653) .
© 2023 The Coca-Cola Company | Confidential information of The Coca-Cola Company | Coca-Cola Freestyle® Flex User Guide | V7 230309
FLEX | MAINTENANCE
DO NOT use bleach or any unapproved
chemicals!
DO NOT soak any parts overnight!
DO NOT use scouring pads, steel wool
or any abrasive material . It will scratch
the surface and result in rusting/pitting!
DO NOT use paper towels . They may
break apart and clog the drain!
DO NOT pour hot liquids into the
drain (greater than 125ºF / 51 . 6 ºC)!
CAUTION: What NOT to do...
21