Table of Contents
Advertisement
COCA-COLA FREESTYLE
8000
| MAINTENANCE
®
Helpful cleaning tips
Coca-Cola recommends
Kay-5
Sanitizer, or a
®
comparable food-grade
chlorine sanitizer.
If using Kay-5 Sanitizer,
add 1oz
packet
(28.4g)
of Kay-5 Sanitizer to
21/2-gallons
of
(9.5L)
fresh, warm water in
a clean bucket .
When using a chlorinated detergent other than
Kay-5 Sanitizer, follow the instructions to produce a
100 ppm chlorine sanitizer solution .
Kay-5 Sanitizer, cleaning brush and replacement nozzle
can be ordered by calling 1-800-241-COKE (2653).
In Canada, call 1-800-318-COKE (2653).
20
CAUTION: What NOT to do...
DO NOT use bleach or any unapproved
chemicals!
DO NOT soak any parts overnight!
DO NOT use scouring pads, steel wool
or any abrasive material . It will scratch
the surface and result in rusting/pitting!
DO NOT use paper towels . They may
break apart and clog the drain!
DO NOT pour hot liquids into the
drain (greater than 125ºF / 51.6ºC)!
© 2023 The Coca-Cola Company | Confidential information of The Coca-Cola Company | Coca-Cola Freestyle® 8000 User Guide | V6 230123
COCA-COLA FREESTYLE
8000
| MAINTENANCE
®
Cleaning nozzle and injector ring
Using a clean cloth, twist
Scrub nozzle with blunt end
1
2
nozzle counter clockwise
of nozzle brush and soap .
and pull down to remove .
Rinse with warm water .
Allow to air dry .
Cleaning ring area in nozzle tray
Scrub ring area, including holes with
Wipe rings with clean cloth
1
2
pointed end of nozzle brush, dipped
and sanitizer until it comes
in sanitizer .
away clean .
Wait 2 minutes .
Repeat scrubbing and wiping
ring with clean sanitizer .
© 2023 The Coca-Cola Company | Confidential information of The Coca-Cola Company | Coca-Cola Freestyle® 8000 User Guide | V6 230123
Submerge nozzle
3
in sanitizer for 2 minutes .
Agitate to remove air pockets .
2
Re-insert nozzle by pushing upward
3
and rotating clockwise .
Pour remaining sanitizer down
dispenser drain .
Allow to air dry .
21
Advertisement
Table of Contents
