Included In The Package; Lcd Screen - Duracell POWER 500 User Manual

INCLUDED IN THE PACKAGE

1. POWER STATION
POWER 500 DETAILS
Cigarette Lighter
Port (CLA)
13V Output

LCD SCREEN

Shows the current State of Charge (SOC) of the Unit.
SOC is displayed as a percentage(%) with resolution
of 1% and represented by 5 Bars (each bar is 20% SOC).
100
%
Shows the estimated time until 100% SOC during
88.8
Charging Discharging
charging and estimated time until 0% SOC during
H discharging with resolution of 0.1 hours. Max time that
can can be displayed is 99.9 hours. During simultaneous
charge and discharge, the Unit displays the discharge
time until empty.
Shows the total instantaneous real-time input or output
INPUT OUTPUT
8888
power with resolution of 1 Watt. During simultaneous
w
charge and discharge, displays the output power.
ERROR The error icon "ERROR" °ashes every second and the
fault status is displayed with error, when there is an
Internal communication failure from MCU to Inverter,
a fan failure, an AC overvoltage, or an AC frequency
out of range, and during the DC input Overvoltage and
Undervoltage protection.
2. AC ADAPTER
LED LCD Info Screen
88.8 Charging Discharging
INPUT
8888
H
100
%
ERROR OVERLOAD
AC Output
88.8 Charging Discharging
INPUT
8888
H
100
%
ERROR OVERLOAD
3. CAR CHARGER CABLE
(To be used for charging
the Unit only)
88
Hz
OUTPUT
w
88
Hz
OUTPUT
w
OVERLOAD
This icon appears when the Unit has been
overloaded or has a short.
This icon appears when the Unit has entered
low- temperature protection mode. Or Internal
communication failure from MCU to BMS.
This icon appears when the Unit has entered
high-temperature protection mode.
This icon displays when there is a failure related
to the internal battery such as: battery undervoltage,
battery overvoltage, battery temperature
sampling failure.
When the Fan turns on, the icon °ashes (rotates).
When the Fan shuts down, the icon will turn o˛.
88
When AC Port is on, the Hz icon will turn on.
When AC port is o˛, the Hz icon will turn o˛.
Hz
4. QUICK START GUIDE
DC Input
located on
side of Unit
USB Output
1 USB-C OUT
1 USB-A FAST CHARGE
2 USB-A