Advertisement
Inattentive Driving Camera
Inattentive Driving Calibration Steps
This screen is the Driver Behavior Camera - Find Head page
8. On the Sensor Camera Calibrate page, select the "Start Calibration
Count Down" Tab. Once you do this "DO NOT MOVE YOUR HEAD"
as the camera is calibrating. At the end of this cycle, you will hear a
shutter sound from the application and the calibration is complete.
You will receive a notation stating, "Calibration Successful" If you
received a Calibration Failed then repeat Step 8 until you received a
Successful Calibration.
9. Select the arrow at the bottom right to precede to next screen.
Fail
CO MPANY CO NFIDENTIAL
COPYRIGHT © 2021 OMNITRACS, LLC. ALL RIGHTS RESERVED. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Pass
9
Rev 2, October 22, 2021
Advertisement
