Operation; Setup , And; Electrical Operation - Hillco 2970H Operator's Manual

Leveling system
Table of Contents

Advertisement

O

ELECTRICAL OPERATION

LEVEL LEFT: Push down on the left side of the Manual Left/Right Leveling Switch.
LEVEL RIGHT: Push down on the right side of the Manual Left/Right Leveling Switch.
AUTO: Push the Auto/Manual Leveling Button once to light the Auto Leveling Indicator Light and engage
automatic leveling operation.
chassis position to maintain a level chassis position. The Manual Left/Right Leveling Switch will override the
automatic leveling controller while the switch is depressed. Upon release of the switch, the leveling system will
return to automatic leveling mode.
MANUAL: Push the Auto/Manual Leveling Button once to enter the Manual Leveling mode (Auto Leveling
Indicator Light not lit). With the Auto Leveling Indicator Lamp not lit the Manual Left/Right leveling switch will
level the combine left and right. When the switch is released the combine chassis will maintain the current
chassis position.
The header trim switch is the four-position header control switch mounted in the combine's SR control lever. It
is used to raise and lower the header as well as trim the header left and right.
TILT LEFT:
Depress the left side of the switch to tilt the header counterclockwise.
TILT RIGHT:
Depress the right side of the switch to tilt the header clockwise.
The leveling system is equipped with a maximum level warning lamp. This lamp, located on the face of the
steering column, indicates when the machine has reached its maximum leveling capability. Important tire and
tread width restrictions apply to the use of combines equipped with the Model 2970H Leveling system that are
intended for use on slopes exceeding the maximum leveling capability. See the "Slope Restrictions" section of
this manual for important details of these restrictions.
Header Trim
Switch
, S
PERATION
LEVELING SYSTEM CONTROLS
MANUAL LEFT / RIGHT LEVELING SWITCH
AUTO/MANUAL LEVELING BUTTON
The automatic leveling controller monitors changes in slope and corrects
HEADER TRIM SWITCH
MAXIMUM LEVEL LAMP
Auto Leveling Indicator Light
Lit = Auto, Not Lit = Manual
,
ETUP
AND
Auto/Manual
Leveling Button
M
AINTENANCE
Manual Left/Right
Leveling Switch
10

Advertisement

Table of Contents
loading

Table of Contents