Miele KFNS 7734 D Operating Instructions Manual page 75

Message

 lights up in the
display and an alarm
also sounds.
Cause and remedy
Indication of an interruption to the power supply: the
temperature in the freezer section over the last few
days or hours has risen too high because of a power
cut or interruption to the power supply.
 Touch OK.
The fault message is confirmed:

 goes out and the alarm will stop.
The warmest temperature recorded in the freezer
section will flash for about 1 minute in the
temperature display for the freezer section. Then the
temperature display will change to the current
temperature in the freezer section.
You can exit from the flashing temperature display
early:
 Touch OK.
The warmest temperature displayed will disappear.
The display will then revert to showing the current
temperature in the freezer. The appliance will go back
to the last temperature setting when the power is
back on.
 Rectify the cause of the alarm.
 Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, it should
be used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
Problem solving guide
75