Advertisement
Available languages
Available languages
Advertisement
Table of Contents
Related Manuals for Peavey 8P
Summary of Contents for Peavey 8P
- Page 1 Cover for A/A-8p...
- Page 2 Intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
-
Page 3: Front Panel
The A/A-8P front panel provides immediate indication of signal status with an activity and clip LED. Included in each channel's signal path is a level limiter which is preset at the optimum input level for the MM-8840 and MM-8830 Digital Interface. -
Page 4: Back Panel
Limit Defeat Switch (6) Enables or disables the limiter in the preamp. The max level for the A/A-8P is preset at +15 dBu (4.4 V) at the factory. This level has been optimized for the Media Matrix MM-8840 and MM-8830 input. Enabling the limiter will assure that the level of the preamp output will not exceed +15 dBu under normal conditions. -
Page 5: Specifications
Inputs: Euro type connector, balanced low or high imped- ance. Outputs: Euro type connector, balanced low impedance 100 ohms. Output Level: +15 dBu with Limiter activated (rated) +26 dBu maximum Controls: 8 input gain controls (tamper resistant, flush- mount, screwdriver slotted) Noise: -75 dB below full output THD:... - Page 6 PHANTOM POWER SWITCH +48V 6.8 K 6.8 K MIC-LINE INPUT SWITCH CONNECTOR A/A-8P Flow Diagram LIMIT DEFEAT SWITCH G A I N L I M I T FRONT PANEL GAIN CONTROL BALANCED OUTPUT OUTPUT CONNECTOR DRIVER ACTIVITY CLIP...
- Page 7 El tablero frontal del A/A-8P proporciona una indicación inmediata del estátus de la señal con un indicador LED de actividad y recorte por sobrecarga. En la ruta de señal de cada canal se incluye un limitador de nivel, el cual está...
- Page 8 Phantom Power Defeat Switch (Interruptor invalidador del refuerzo de potencia) (7) El A/A-8P proporciona +48 volts CC a las varillas de (+) Alta y de (-) Baja de las conecciones de entrada. Este interruptor habilitará o invalidará el suministro de ese voltaje al canal designado por la etiqueta del canal.
-
Page 9: Panneau Avant
La protection contre les modifications involontaires ou non autorisées des niveaux est assurée par des commandes de niveau à l’épreuve des fausses manœuvres, réglables à l’aide d’un tournevis. Le A/A-8P est solidement intégré à un appareil de dimensions standard : 48,25 cm (19 po.) de longueur et un espace rack de hauteur. - Page 10 Limit Defeat Switch (Interrupteur de désactivation du limiteur) (6) Il permet de mettre en fonction ou de désactiver le limiteur du préampli. Le niveau maximum de l’A/A-8P est préréglé en usine à +15 dBu (4,4 V). Ce niveau est optimal pour l’entrée des Media Matrix MM-8840 et MM-8830.
- Page 11 Mikrofon- oder Line-Eingang, so daß ein großer Bereich an Eingangspegeln verwendet werden kann. Zwei LEDs auf der Frontplatte des A/A-8P, eine LED für Aktivität und eine für Übersteuerung, zeigen den aktuellen Signalzustand an. Im Signalweg jedes Kanals ist ein Begrenzungsschalter enthalten, der auf den optimalen Eingangspegel für die Digitalschnittstellen MM-8840 und MM-8830 eingestellt ist.
- Page 12 Ein-/Ausgangspegeln usw. ersetzen. Phantom Power Defeat Switch (Phantomspeisung-Ein/Aus-Schalter) (7) Der A/A-8P versorgt die Kontakte (+, hoch) und (-, niedrig) der Eingangsanschlüsse mit +48 V Gleichstrom. Dieser Schalter aktiviert oder deaktiviert diese Phantomspeisung für den entsprechenden Kanal. HINWEIS 1: Die Phantomspeisung wird deaktiviert, wenn ein Kanal von niedrigpegeligem Eingang auf hochpegeligen Eingang umgeschaltet wird.
- Page 13 For further information on other Peavey Architectural Acoustics products, ask your Authorized Peavey Sound Contractor for the appropriate Peavey Architectural Acoustics Commercial Sound For Permanent Installations Engineered Sound Products For Permanent Installations Be Sure To Ask About Products In The Following Categories:...
-
Page 14: Limited Warranty
If within one (1) year from date of purchase a properly installed product proves to be defective and Peavey is notified, Peavey will repair or replace it at no charge. (Note: Batteries and patch cords not covered.) “Original purchaser” means the customer for whom the product is originally installed. -
Page 15: Important Safety Instructions
16. The user should not attempt to service this equipment. All service work should be done by a qualified service technician. 17. This product should be used only with a cart or stand that is recommended by Peavey Electronics. 18. Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in susceptibility to noise induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. - Page 16 ® ARCHITECTURAL ACOUSTICS® Features and specifications subject to change without notice. A Division of Peavey Electronics Corporation ® 711 A Street / Meridian, MS 39301 / U.S.A. / (601) 483-5376 / Fax 486-1154 ©1995 #80302355 Printed in U.S.A. 6/96...