Advertisement
9. MAINTENANCE
Note:
Only fully qualified personnel should attempt maintenance or repairs.
9.1.
When not in use, the beam should be stored in the lowest position, to minimise corrosion.
9.2.
Keep the beam clean and lubricate all moving parts on a regular basis, (fig.7).
WARNING: DO NOT use brake fluid, or any fluid other than a good quality jack oil, such as SEALEY HYDRAULIC JACK OIL, as this may
‰
cause serious damage to the jack and will invalidate the warranty!
9.3.
To check on fluid level and to top up, jack the beam up so that the oil plug (see fig.6) can be accessed and removed .
The level should be just below the vent, top up as necessary and DO NOT overfill as this will affect the smooth operation of the beam.
Replace the plug.
9.4.
Before each use check for broken, cracked, bent, or loose parts, or any visible damage to pump, saddles, lifting arms, frame and all
parts including nuts, bolts, pins and other fasteners. Check for oil leaks (fig.8). If any suspect item is found, remove beam from service
and take action to remedy the problem. DO NOT use the beam if it is believed to have been subjected to abnormal load or shock load.
Inspect and take appropriate action.
9.5.
Periodically check the pump piston and the ram for signs of corrosion. Clean exposed areas with a clean oiled cloth.
N.B.: NO RESPONSIBILITY IS ACCEPTED FOR INCORRECT USE OF THIS PRODUCT.
Hydraulic products are only repaired by local service agents. We have service/repair agents in all parts of the UK.
DO NOT RETURN JACKS TO US. Please telephone us on 01284 757500 to obtain the address and phone number of your local agent.
If jack is under guarantee you can also contact your local stockist.
9.6.
De-commissioning
If the beam eventually becomes unserviceable, draw off the oil into an approved container and dispose of the jack and the oil
according to local regulations.
fig.6
fig.7
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts
without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 24 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
SJBEX2000S, SJBEX3000S Issue:1 26/10/22
fig.8
REGISTER YOUR
PURCHASE HERE
Advertisement
