Advertisement
3. SPECIFICATION
Model No: .............................................. SJBEX2000S/3000S
Air Pressure: ....................................................... 109 - 174ps
Beam Lift: ...................................................... 250mm/270mm
Capacity: ........................................................2000kg/3000kg
Load Arm Reach: .............................................. 675-1510mm
Support Arm Reach: .................... 905-1315mm/905-1310mm
7. ASSEMBLY
7.1.
Extend arms to correct width (depending on application) and secure as per fig.2.
fig.1
fig.3
7.2.
SECURE JACKING BEAM WITH PROTECTIVE PLATE ASSEMBLY (IF APPLICABLE) FIG.3
7.2.1.
Protective plate assembly needs to be accurately bent to provide a means to prevent the product tipping if using on a ramp.
Refer to fig.3 top image.
8. OPERATION
fig.4
8.1.
Connect to air supply fig.4.
8.2.
LIFTING AND LOWERING FIG.5.
8.2.1.
Ensure that all of Safety Section 1 are understood and adhered to before using the product.
8.2.2.
Lowering requires both knobs to be turned anticlockwise.
© Jack Sealey Limited
fig.2
Original Language Version
SJBEX2000S, SJBEX3000S Issue:1 26/10/22
fig.5
Advertisement
